MATLAB Figure Reference: box Traces

A box trace is a struct inside fig.data which has type equal to 'box'. This section lists all of the valid keys that a box struct can contain.

Each box spans from quartile 1 (Q1) to quartile 3 (Q3). The second quartile (Q2, i.e. the median) is marked by a line inside the box. The fences grow outward from the boxes' edges, by default they span +/- 1.5 times the interquartile range (IQR: Q3-Q1), The sample mean and standard deviation as well as notches and the sample, outlier and suspected outliers points can be optionally added to the box plot. The values and positions corresponding to each boxes can be input using two signatures. The first signature expects users to supply the sample values in the `y` data array for vertical boxes (`x` for horizontal boxes). By supplying an `x` (`y`) array, one box per distinct `x` (`y`) value is drawn If no `x` (`y`) cell array is provided, a single box is drawn. In this case, the box is positioned with the trace `name` or with `x0` (`y0`) if provided. The second signature expects users to supply the boxes corresponding Q1, median and Q3 statistics in the `q1`, `median` and `q3` data arrays respectively. Other box features relying on statistics namely `lowerfence`, `upperfence`, `notchspan` can be set directly by the users. To have plotly compute them or to show sample points besides the boxes, users can set the `y` data array for vertical boxes (`x` for horizontal boxes) to a 2D array with the outer length corresponding to the number of boxes in the traces and the inner length corresponding the sample size.

  • type
    Parent: data[type=box]
    Type: 'box'
  • name
    Parent: data[type=box]
    Type: string

    Sets the trace name. The trace name appears as the legend item and on hover. For box traces, the name will also be used for the position coordinate, if `x` and `x0` (`y` and `y0` if horizontal) are missing and the position axis is categorical

  • visible
    Parent: data[type=box]
    Type: enumerated , one of ( true | false | 'legendonly' )
    Default: true

    Determines whether or not this trace is visible. If 'legendonly', the trace is not drawn, but can appear as a legend item (provided that the legend itself is visible).

  • showlegend
    Parent: data[type=box]
    Type: boolean
    Default: true

    Determines whether or not an item corresponding to this trace is shown in the legend.

  • legend
    Parent: data[type=box]
    Type: subplotid
    Default: legend

    Sets the reference to a legend to show this trace in. References to these legends are 'legend', 'legend2', 'legend3', etc. Settings for these legends are set in the layout, under `layout.legend`, `layout.legend2`, etc.

  • legendrank
    Parent: data[type=box]
    Type: number
    Default: 1000

    Sets the legend rank for this trace. Items and groups with smaller ranks are presented on top/left side while with 'reversed' `legend.traceorder` they are on bottom/right side. The default legendrank is 1000, so that you can use ranks less than 1000 to place certain items before all unranked items, and ranks greater than 1000 to go after all unranked items. When having unranked or equal rank items shapes would be displayed after traces i.e. according to their order in data and layout.

  • legendgroup
    Parent: data[type=box]
    Type: string
    Default: ''

    Sets the legend group for this trace. Traces and shapes part of the same legend group hide/show at the same time when toggling legend items.

  • legendgrouptitle
    Parent: data[type=box]
    Type: struct containing one or more of the keys listed below.
    • font
      Parent: data[type=box].legendgrouptitle
      Type: struct containing one or more of the keys listed below.

      Sets this legend group's title font.

      • color
        Parent: data[type=box].legendgrouptitle.font
        Type: color
      • family
        Parent: data[type=box].legendgrouptitle.font
        Type: string

        HTML font family - the typeface that will be applied by the web browser. The web browser will only be able to apply a font if it is available on the system which it operates. Provide multiple font families, separated by commas, to indicate the preference in which to apply fonts if they aren't available on the system. The Chart Studio Cloud (at https://chart-studio.plotly.com or on-premise) generates images on a server, where only a select number of fonts are installed and supported. These include 'Arial', 'Balto', 'Courier New', 'Droid Sans', 'Droid Serif', 'Droid Sans Mono', 'Gravitas One', 'Old Standard TT', 'Open Sans', 'Overpass', 'PT Sans Narrow', 'Raleway', 'Times New Roman'.

      • lineposition
        Parent: data[type=box].legendgrouptitle.font
        Type: flaglist string. Any combination of 'under', 'over', 'through' joined with a '+' OR 'none'.
        Examples: 'under', 'over', 'under+over', 'under+over+through', 'none'
        Default: 'none'

        Sets the kind of decoration line(s) with text, such as an 'under', 'over' or 'through' as well as combinations e.g. 'under+over', etc.

      • shadow
        Parent: data[type=box].legendgrouptitle.font
        Type: string
        Default: 'none'

        Sets the shape and color of the shadow behind text. 'auto' places minimal shadow and applies contrast text font color. See https://developer.mozilla.org/en-US/docs/Web/CSS/text-shadow for additional options.

      • size
        Parent: data[type=box].legendgrouptitle.font
        Type: number greater than or equal to 1
      • style
        Parent: data[type=box].legendgrouptitle.font
        Type: enumerated , one of ( 'normal' | 'italic' )
        Default: 'normal'

        Sets whether a font should be styled with a normal or italic face from its family.

      • textcase
        Parent: data[type=box].legendgrouptitle.font
        Type: enumerated , one of ( 'normal' | 'word caps' | 'upper' | 'lower' )
        Default: 'normal'

        Sets capitalization of text. It can be used to make text appear in all-uppercase or all-lowercase, or with each word capitalized.

      • variant
        Parent: data[type=box].legendgrouptitle.font
        Type: enumerated , one of ( 'normal' | 'small-caps' | 'all-small-caps' | 'all-petite-caps' | 'petite-caps' | 'unicase' )
        Default: 'normal'

        Sets the variant of the font.

      • weight
        Parent: data[type=box].legendgrouptitle.font
        Type: integer between or equal to 1 and 1000
        Default: normal

        Sets the weight (or boldness) of the font.

    • text
      Parent: data[type=box].legendgrouptitle
      Type: string
      Default: ''

      Sets the title of the legend group.

  • legendwidth
    Parent: data[type=box]
    Type: number greater than or equal to 0

    Sets the width (in px or fraction) of the legend for this trace.

  • opacity
    Parent: data[type=box]
    Type: number between or equal to 0 and 1
    Default: 1

    Sets the opacity of the trace.

  • ids
    Parent: data[type=box]
    Type: array

    Assigns id labels to each datum. These ids for object constancy of data points during animation. Should be an array of strings, not numbers or any other type.

  • zorder
    Parent: data[type=box]
    Type: integer
    Default: 0

    Sets the layer on which this trace is displayed, relative to other SVG traces on the same subplot. SVG traces with higher `zorder` appear in front of those with lower `zorder`.

  • x
    Parent: data[type=box]
    Type: array

    Sets the x sample data or coordinates. See overview for more info.

  • x0
    Parent: data[type=box]
    Type: number or categorical coordinate string

    Sets the x coordinate for single-box traces or the starting coordinate for multi-box traces set using q1/median/q3. See overview for more info.

  • dx
    Parent: data[type=box]
    Type: number

    Sets the x coordinate step for multi-box traces set using q1/median/q3.

  • y
    Parent: data[type=box]
    Type: array

    Sets the y sample data or coordinates. See overview for more info.

  • y0
    Parent: data[type=box]
    Type: number or categorical coordinate string

    Sets the y coordinate for single-box traces or the starting coordinate for multi-box traces set using q1/median/q3. See overview for more info.

  • dy
    Parent: data[type=box]
    Type: number

    Sets the y coordinate step for multi-box traces set using q1/median/q3.

  • width
    Parent: data[type=box]
    Type: number greater than or equal to 0
    Default: 0

    Sets the width of the box in data coordinate If '0' (default value) the width is automatically selected based on the positions of other box traces in the same subplot.

  • text
    Parent: data[type=box]
    Type: string or array of strings
    Default: ''

    Sets the text elements associated with each sample value. If a single string, the same string appears over all the data points. If an array of string, the items are mapped in order to the this trace's (x,y) coordinates. To be seen, trace `hoverinfo` must contain a 'text' flag.

  • hovertext
    Parent: data[type=box]
    Type: string or array of strings
    Default: ''

    Same as `text`.

  • hoverinfo
    Parent: data[type=box]
    Type: flaglist string. Any combination of 'x', 'y', 'z', 'text', 'name' joined with a '+' OR 'all' or 'none' or 'skip'.
    Examples: 'x', 'y', 'x+y', 'x+y+z', 'all'
    Default: 'all'

    Determines which trace information appear on hover. If `none` or `skip` are set, no information is displayed upon hovering. But, if `none` is set, click and hover events are still fired.

  • hovertemplate
    Parent: data[type=box]
    Type: string or array of strings
    Default: ''

    Template string used for rendering the information that appear on hover box. Note that this will override `hoverinfo`. Variables are inserted using %{variable}, for example "y: %{y}" as well as %{xother}, {%_xother}, {%_xother_}, {%xother_}. When showing info for several points, 'xother' will be added to those with different x positions from the first point. An underscore before or after '(x|y)other' will add a space on that side, only when this field is shown. Numbers are formatted using d3-format's syntax %{variable:d3-format}, for example "Price: %{y:$.2f}". https://github.com/d3/d3-format/tree/v1.4.5#d3-format for details on the formatting syntax. Dates are formatted using d3-time-format's syntax %{variable|d3-time-format}, for example "Day: %{2019-01-01|%A}". https://github.com/d3/d3-time-format/tree/v2.2.3#locale_format for details on the date formatting syntax. The variables available in `hovertemplate` are the ones emitted as event data described at this link https://plotly.com/javascript/plotlyjs-events/#event-data. Additionally, every attributes that can be specified per-point (the ones that are `arrayOk: true`) are available. Anything contained in tag `<extra>` is displayed in the secondary box, for example "<extra>{fullData.name}</extra>". To hide the secondary box completely, use an empty tag `<extra></extra>`.

  • xhoverformat
    Parent: data[type=box]
    Type: string
    Default: ''

    Sets the hover text formatting rulefor `x` using d3 formatting mini-languages which are very similar to those in Python. For numbers, see: https://github.com/d3/d3-format/tree/v1.4.5#d3-format. And for dates see: https://github.com/d3/d3-time-format/tree/v2.2.3#locale_format. We add two items to d3's date formatter: '%h' for half of the year as a decimal number as well as '%{n}f' for fractional seconds with n digits. For example, '2016-10-13 09:15:23.456' with tickformat '%H~%M~%S.%2f' would display '09~15~23.46'By default the values are formatted using `xaxis.hoverformat`.

  • yhoverformat
    Parent: data[type=box]
    Type: string
    Default: ''

    Sets the hover text formatting rulefor `y` using d3 formatting mini-languages which are very similar to those in Python. For numbers, see: https://github.com/d3/d3-format/tree/v1.4.5#d3-format. And for dates see: https://github.com/d3/d3-time-format/tree/v2.2.3#locale_format. We add two items to d3's date formatter: '%h' for half of the year as a decimal number as well as '%{n}f' for fractional seconds with n digits. For example, '2016-10-13 09:15:23.456' with tickformat '%H~%M~%S.%2f' would display '09~15~23.46'By default the values are formatted using `yaxis.hoverformat`.

  • meta
    Parent: data[type=box]
    Type: number or categorical coordinate string

    Assigns extra meta information associated with this trace that can be used in various text attributes. Attributes such as trace `name`, graph, axis and colorbar `title.text`, annotation `text` `rangeselector`, `updatemenues` and `sliders` `label` text all support `meta`. To access the trace `meta` values in an attribute in the same trace, simply use `%{meta[i]}` where `i` is the index or key of the `meta` item in question. To access trace `meta` in layout attributes, use `%{data[n[.meta[i]}` where `i` is the index or key of the `meta` and `n` is the trace index.

  • customdata
    Parent: data[type=box]
    Type: array

    Assigns extra data each datum. This may be useful when listening to hover, click and selection events. Note that, 'scatter' traces also appends customdata items in the markers DOM elements

  • xaxis
    Parent: data[type=box]
    Type: subplotid
    Default: x

    Sets a reference between this trace's x coordinates and a 2D cartesian x axis. If 'x' (the default value), the x coordinates refer to `layout.xaxis`. If 'x2', the x coordinates refer to `layout.xaxis2`, and so on.

  • yaxis
    Parent: data[type=box]
    Type: subplotid
    Default: y

    Sets a reference between this trace's y coordinates and a 2D cartesian y axis. If 'y' (the default value), the y coordinates refer to `layout.yaxis`. If 'y2', the y coordinates refer to `layout.yaxis2`, and so on.

  • orientation
    Parent: data[type=box]
    Type: enumerated , one of ( 'v' | 'h' )

    Sets the orientation of the box(es). If 'v' ('h'), the distribution is visualized along the vertical (horizontal).

  • alignmentgroup
    Parent: data[type=box]
    Type: string
    Default: ''

    Set several traces linked to the same position axis or matching axes to the same alignmentgroup. This controls whether bars compute their positional range dependently or independently.

  • offsetgroup
    Parent: data[type=box]
    Type: string
    Default: ''

    Set several traces linked to the same position axis or matching axes to the same offsetgroup where bars of the same position coordinate will line up.

  • xperiod
    Parent: data[type=box]
    Type: number or categorical coordinate string
    Default: 0

    Only relevant when the axis `type` is 'date'. Sets the period positioning in milliseconds or 'M<n>' on the x axis. Special values in the form of 'M<n>' could be used to declare the number of months. In this case `n` must be a positive integer.

  • xperiodalignment
    Parent: data[type=box]
    Type: enumerated , one of ( 'start' | 'middle' | 'end' )
    Default: 'middle'

    Only relevant when the axis `type` is 'date'. Sets the alignment of data points on the x axis.

  • xperiod0
    Parent: data[type=box]
    Type: number or categorical coordinate string

    Only relevant when the axis `type` is 'date'. Sets the base for period positioning in milliseconds or date string on the x0 axis. When `x0period` is round number of weeks, the `x0period0` by default would be on a Sunday i.e. 2000-01-02, otherwise it would be at 2000-01-01.

  • yperiod
    Parent: data[type=box]
    Type: number or categorical coordinate string
    Default: 0

    Only relevant when the axis `type` is 'date'. Sets the period positioning in milliseconds or 'M<n>' on the y axis. Special values in the form of 'M<n>' could be used to declare the number of months. In this case `n` must be a positive integer.

  • yperiodalignment
    Parent: data[type=box]
    Type: enumerated , one of ( 'start' | 'middle' | 'end' )
    Default: 'middle'

    Only relevant when the axis `type` is 'date'. Sets the alignment of data points on the y axis.

  • yperiod0
    Parent: data[type=box]
    Type: number or categorical coordinate string

    Only relevant when the axis `type` is 'date'. Sets the base for period positioning in milliseconds or date string on the y0 axis. When `y0period` is round number of weeks, the `y0period0` by default would be on a Sunday i.e. 2000-01-02, otherwise it would be at 2000-01-01.

  • marker
    Parent: data[type=box]
    Type: struct containing one or more of the keys listed below.
    • angle
      Parent: data[type=box].marker
      Type: angle
      Default: 0

      Sets the marker angle in respect to `angleref`.

    • color
      Parent: data[type=box].marker
      Type: color

      Sets the marker color. It accepts either a specific color or an array of numbers that are mapped to the colorscale relative to the max and min values of the array or relative to `marker.cmin` and `marker.cmax` if set.

    • line
      Parent: data[type=box].marker
      Type: struct containing one or more of the keys listed below.
      • color
        Parent: data[type=box].marker.line
        Type: color
        Default: '#444'

        Sets the marker.line color. It accepts either a specific color or an array of numbers that are mapped to the colorscale relative to the max and min values of the array or relative to `marker.line.cmin` and `marker.line.cmax` if set.

      • outliercolor
        Parent: data[type=box].marker.line
        Type: color

        Sets the border line color of the outlier sample points. Defaults to marker.color

      • outlierwidth
        Parent: data[type=box].marker.line
        Type: number greater than or equal to 0
        Default: 1

        Sets the border line width (in px) of the outlier sample points.

      • width
        Parent: data[type=box].marker.line
        Type: number greater than or equal to 0
        Default: 0

        Sets the width (in px) of the lines bounding the marker points.

    • opacity
      Parent: data[type=box].marker
      Type: number between or equal to 0 and 1
      Default: 1

      Sets the marker opacity.

    • outliercolor
      Parent: data[type=box].marker
      Type: color
      Default: 'rgba(0, 0, 0, 0)'

      Sets the color of the outlier sample points.

    • size
      Parent: data[type=box].marker
      Type: number greater than or equal to 0
      Default: 6

      Sets the marker size (in px).

    • symbol
      Parent: data[type=box].marker
      Type: enumerated , one of ( '0' | '0' | 'circle' | '100' | '100' | 'circle-open' | '200' | '200' | 'circle-dot' | '300' | '300' | 'circle-open-dot' | '1' | '1' | 'square' | '101' | '101' | 'square-open' | '201' | '201' | 'square-dot' | '301' | '301' | 'square-open-dot' | '2' | '2' | 'diamond' | '102' | '102' | 'diamond-open' | '202' | '202' | 'diamond-dot' | '302' | '302' | 'diamond-open-dot' | '3' | '3' | 'cross' | '103' | '103' | 'cross-open' | '203' | '203' | 'cross-dot' | '303' | '303' | 'cross-open-dot' | '4' | '4' | 'x' | '104' | '104' | 'x-open' | '204' | '204' | 'x-dot' | '304' | '304' | 'x-open-dot' | '5' | '5' | 'triangle-up' | '105' | '105' | 'triangle-up-open' | '205' | '205' | 'triangle-up-dot' | '305' | '305' | 'triangle-up-open-dot' | '6' | '6' | 'triangle-down' | '106' | '106' | 'triangle-down-open' | '206' | '206' | 'triangle-down-dot' | '306' | '306' | 'triangle-down-open-dot' | '7' | '7' | 'triangle-left' | '107' | '107' | 'triangle-left-open' | '207' | '207' | 'triangle-left-dot' | '307' | '307' | 'triangle-left-open-dot' | '8' | '8' | 'triangle-right' | '108' | '108' | 'triangle-right-open' | '208' | '208' | 'triangle-right-dot' | '308' | '308' | 'triangle-right-open-dot' | '9' | '9' | 'triangle-ne' | '109' | '109' | 'triangle-ne-open' | '209' | '209' | 'triangle-ne-dot' | '309' | '309' | 'triangle-ne-open-dot' | '10' | '10' | 'triangle-se' | '110' | '110' | 'triangle-se-open' | '210' | '210' | 'triangle-se-dot' | '310' | '310' | 'triangle-se-open-dot' | '11' | '11' | 'triangle-sw' | '111' | '111' | 'triangle-sw-open' | '211' | '211' | 'triangle-sw-dot' | '311' | '311' | 'triangle-sw-open-dot' | '12' | '12' | 'triangle-nw' | '112' | '112' | 'triangle-nw-open' | '212' | '212' | 'triangle-nw-dot' | '312' | '312' | 'triangle-nw-open-dot' | '13' | '13' | 'pentagon' | '113' | '113' | 'pentagon-open' | '213' | '213' | 'pentagon-dot' | '313' | '313' | 'pentagon-open-dot' | '14' | '14' | 'hexagon' | '114' | '114' | 'hexagon-open' | '214' | '214' | 'hexagon-dot' | '314' | '314' | 'hexagon-open-dot' | '15' | '15' | 'hexagon2' | '115' | '115' | 'hexagon2-open' | '215' | '215' | 'hexagon2-dot' | '315' | '315' | 'hexagon2-open-dot' | '16' | '16' | 'octagon' | '116' | '116' | 'octagon-open' | '216' | '216' | 'octagon-dot' | '316' | '316' | 'octagon-open-dot' | '17' | '17' | 'star' | '117' | '117' | 'star-open' | '217' | '217' | 'star-dot' | '317' | '317' | 'star-open-dot' | '18' | '18' | 'hexagram' | '118' | '118' | 'hexagram-open' | '218' | '218' | 'hexagram-dot' | '318' | '318' | 'hexagram-open-dot' | '19' | '19' | 'star-triangle-up' | '119' | '119' | 'star-triangle-up-open' | '219' | '219' | 'star-triangle-up-dot' | '319' | '319' | 'star-triangle-up-open-dot' | '20' | '20' | 'star-triangle-down' | '120' | '120' | 'star-triangle-down-open' | '220' | '220' | 'star-triangle-down-dot' | '320' | '320' | 'star-triangle-down-open-dot' | '21' | '21' | 'star-square' | '121' | '121' | 'star-square-open' | '221' | '221' | 'star-square-dot' | '321' | '321' | 'star-square-open-dot' | '22' | '22' | 'star-diamond' | '122' | '122' | 'star-diamond-open' | '222' | '222' | 'star-diamond-dot' | '322' | '322' | 'star-diamond-open-dot' | '23' | '23' | 'diamond-tall' | '123' | '123' | 'diamond-tall-open' | '223' | '223' | 'diamond-tall-dot' | '323' | '323' | 'diamond-tall-open-dot' | '24' | '24' | 'diamond-wide' | '124' | '124' | 'diamond-wide-open' | '224' | '224' | 'diamond-wide-dot' | '324' | '324' | 'diamond-wide-open-dot' | '25' | '25' | 'hourglass' | '125' | '125' | 'hourglass-open' | '26' | '26' | 'bowtie' | '126' | '126' | 'bowtie-open' | '27' | '27' | 'circle-cross' | '127' | '127' | 'circle-cross-open' | '28' | '28' | 'circle-x' | '128' | '128' | 'circle-x-open' | '29' | '29' | 'square-cross' | '129' | '129' | 'square-cross-open' | '30' | '30' | 'square-x' | '130' | '130' | 'square-x-open' | '31' | '31' | 'diamond-cross' | '131' | '131' | 'diamond-cross-open' | '32' | '32' | 'diamond-x' | '132' | '132' | 'diamond-x-open' | '33' | '33' | 'cross-thin' | '133' | '133' | 'cross-thin-open' | '34' | '34' | 'x-thin' | '134' | '134' | 'x-thin-open' | '35' | '35' | 'asterisk' | '135' | '135' | 'asterisk-open' | '36' | '36' | 'hash' | '136' | '136' | 'hash-open' | '236' | '236' | 'hash-dot' | '336' | '336' | 'hash-open-dot' | '37' | '37' | 'y-up' | '137' | '137' | 'y-up-open' | '38' | '38' | 'y-down' | '138' | '138' | 'y-down-open' | '39' | '39' | 'y-left' | '139' | '139' | 'y-left-open' | '40' | '40' | 'y-right' | '140' | '140' | 'y-right-open' | '41' | '41' | 'line-ew' | '141' | '141' | 'line-ew-open' | '42' | '42' | 'line-ns' | '142' | '142' | 'line-ns-open' | '43' | '43' | 'line-ne' | '143' | '143' | 'line-ne-open' | '44' | '44' | 'line-nw' | '144' | '144' | 'line-nw-open' | '45' | '45' | 'arrow-up' | '145' | '145' | 'arrow-up-open' | '46' | '46' | 'arrow-down' | '146' | '146' | 'arrow-down-open' | '47' | '47' | 'arrow-left' | '147' | '147' | 'arrow-left-open' | '48' | '48' | 'arrow-right' | '148' | '148' | 'arrow-right-open' | '49' | '49' | 'arrow-bar-up' | '149' | '149' | 'arrow-bar-up-open' | '50' | '50' | 'arrow-bar-down' | '150' | '150' | 'arrow-bar-down-open' | '51' | '51' | 'arrow-bar-left' | '151' | '151' | 'arrow-bar-left-open' | '52' | '52' | 'arrow-bar-right' | '152' | '152' | 'arrow-bar-right-open' | '53' | '53' | 'arrow' | '153' | '153' | 'arrow-open' | '54' | '54' | 'arrow-wide' | '154' | '154' | 'arrow-wide-open' )
      Default: 'circle'

      Sets the marker symbol type. Adding 100 is equivalent to appending '-open' to a symbol name. Adding 200 is equivalent to appending '-dot' to a symbol name. Adding 300 is equivalent to appending '-open-dot' or 'dot-open' to a symbol name.

  • line
    Parent: data[type=box]
    Type: struct containing one or more of the keys listed below.
    • color
      Parent: data[type=box].line
      Type: color

      Sets the color of line bounding the box(es).

    • width
      Parent: data[type=box].line
      Type: number greater than or equal to 0
      Default: 2

      Sets the width (in px) of line bounding the box(es).

  • boxmean
    Parent: data[type=box]
    Type: enumerated , one of ( true | 'sd' | false )

    If 'true', the mean of the box(es)' underlying distribution is drawn as a dashed line inside the box(es). If 'sd' the standard deviation is also drawn. Defaults to 'true' when `mean` is set. Defaults to 'sd' when `sd` is set Otherwise defaults to 'false'.

  • boxpoints
    Parent: data[type=box]
    Type: enumerated , one of ( 'all' | 'outliers' | 'suspectedoutliers' | false )

    If 'outliers', only the sample points lying outside the whiskers are shown If 'suspectedoutliers', the outlier points are shown and points either less than 4'Q1-3'Q3 or greater than 4'Q3-3'Q1 are highlighted (see `outliercolor`) If 'all', all sample points are shown If 'false', only the box(es) are shown with no sample points Defaults to 'suspectedoutliers' when `marker.outliercolor` or `marker.line.outliercolor` is set. Defaults to 'all' under the q1/median/q3 signature. Otherwise defaults to 'outliers'.

  • notched
    Parent: data[type=box]
    Type: boolean

    Determines whether or not notches are drawn. Notches displays a confidence interval around the median. We compute the confidence interval as median +/- 1.57 ' IQR / sqrt(N), where IQR is the interquartile range and N is the sample size. If two boxes' notches do not overlap there is 95% confidence their medians differ. See https://sites.google.com/site/davidsstatistics/home/notched-box-plots for more info. Defaults to 'false' unless `notchwidth` or `notchspan` is set.

  • notchwidth
    Parent: data[type=box]
    Type: number between or equal to 0 and 0.5
    Default: 0.25

    Sets the width of the notches relative to the box' width. For example, with 0, the notches are as wide as the box(es).

  • showwhiskers
    Parent: data[type=box]
    Type: boolean

    Determines whether or not whiskers are visible. Defaults to true for `sizemode` 'quartiles', false for 'sd'.

  • whiskerwidth
    Parent: data[type=box]
    Type: number between or equal to 0 and 1
    Default: 0.5

    Sets the width of the whiskers relative to the box' width. For example, with 1, the whiskers are as wide as the box(es).

  • q1
    Parent: data[type=box]
    Type: array

    Sets the Quartile 1 values. There should be as many items as the number of boxes desired.

  • median
    Parent: data[type=box]
    Type: array

    Sets the median values. There should be as many items as the number of boxes desired.

  • q3
    Parent: data[type=box]
    Type: array

    Sets the Quartile 3 values. There should be as many items as the number of boxes desired.

  • lowerfence
    Parent: data[type=box]
    Type: array

    Sets the lower fence values. There should be as many items as the number of boxes desired. This attribute has effect only under the q1/median/q3 signature. If `lowerfence` is not provided but a sample (in `y` or `x`) is set, we compute the lower as the last sample point below 1.5 times the IQR.

  • upperfence
    Parent: data[type=box]
    Type: array

    Sets the upper fence values. There should be as many items as the number of boxes desired. This attribute has effect only under the q1/median/q3 signature. If `upperfence` is not provided but a sample (in `y` or `x`) is set, we compute the upper as the last sample point above 1.5 times the IQR.

  • notchspan
    Parent: data[type=box]
    Type: array

    Sets the notch span from the boxes' `median` values. There should be as many items as the number of boxes desired. This attribute has effect only under the q1/median/q3 signature. If `notchspan` is not provided but a sample (in `y` or `x`) is set, we compute it as 1.57 ' IQR / sqrt(N), where N is the sample size.

  • mean
    Parent: data[type=box]
    Type: array

    Sets the mean values. There should be as many items as the number of boxes desired. This attribute has effect only under the q1/median/q3 signature. If `mean` is not provided but a sample (in `y` or `x`) is set, we compute the mean for each box using the sample values.

  • sd
    Parent: data[type=box]
    Type: array

    Sets the standard deviation values. There should be as many items as the number of boxes desired. This attribute has effect only under the q1/median/q3 signature. If `sd` is not provided but a sample (in `y` or `x`) is set, we compute the standard deviation for each box using the sample values.

  • sdmultiple
    Parent: data[type=box]
    Type: number greater than or equal to 0
    Default: 1

    Scales the box size when sizemode=sd Allowing boxes to be drawn across any stddev range For example 1-stddev, 3-stddev, 5-stddev

  • quartilemethod
    Parent: data[type=box]
    Type: enumerated , one of ( 'linear' | 'exclusive' | 'inclusive' )
    Default: 'linear'

    Sets the method used to compute the sample's Q1 and Q3 quartiles. The 'linear' method uses the 25th percentile for Q1 and 75th percentile for Q3 as computed using method #10 (listed on http://jse.amstat.org/v14n3/langford.html). The 'exclusive' method uses the median to divide the ordered dataset into two halves if the sample is odd, it does not include the median in either half - Q1 is then the median of the lower half and Q3 the median of the upper half. The 'inclusive' method also uses the median to divide the ordered dataset into two halves but if the sample is odd, it includes the median in both halves - Q1 is then the median of the lower half and Q3 the median of the upper half.

  • selectedpoints
    Parent: data[type=box]
    Type: number or categorical coordinate string

    Array containing integer indices of selected points. Has an effect only for traces that support selections. Note that an empty array means an empty selection where the `unselected` are turned on for all points, whereas, any other non-array values means no selection all where the `selected` and `unselected` styles have no effect.

  • selected
    Parent: data[type=box]
    Type: struct containing one or more of the keys listed below.
    • marker
      Parent: data[type=box].selected
      Type: struct containing one or more of the keys listed below.
      • color
        Parent: data[type=box].selected.marker
        Type: color

        Sets the marker color of selected points.

      • opacity
        Parent: data[type=box].selected.marker
        Type: number between or equal to 0 and 1

        Sets the marker opacity of selected points.

      • size
        Parent: data[type=box].selected.marker
        Type: number greater than or equal to 0

        Sets the marker size of selected points.

  • unselected
    Parent: data[type=box]
    Type: struct containing one or more of the keys listed below.
    • marker
      Parent: data[type=box].unselected
      Type: struct containing one or more of the keys listed below.
      • color
        Parent: data[type=box].unselected.marker
        Type: color

        Sets the marker color of unselected points, applied only when a selection exists.

      • opacity
        Parent: data[type=box].unselected.marker
        Type: number between or equal to 0 and 1

        Sets the marker opacity of unselected points, applied only when a selection exists.

      • size
        Parent: data[type=box].unselected.marker
        Type: number greater than or equal to 0

        Sets the marker size of unselected points, applied only when a selection exists.

  • fillcolor
    Parent: data[type=box]
    Type: color

    Sets the fill color. Defaults to a half-transparent variant of the line color, marker color, or marker line color, whichever is available.

  • hoverlabel
    Parent: data[type=box]
    Type: struct containing one or more of the keys listed below.
    • align
      Parent: data[type=box].hoverlabel
      Type: enumerated or array of enumerateds , one of ( 'left' | 'right' | 'auto' )
      Default: 'auto'

      Sets the horizontal alignment of the text content within hover label box. Has an effect only if the hover label text spans more two or more lines

    • bgcolor
      Parent: data[type=box].hoverlabel
      Type: color or array of colors

      Sets the background color of the hover labels for this trace

    • bordercolor
      Parent: data[type=box].hoverlabel
      Type: color or array of colors

      Sets the border color of the hover labels for this trace.

    • font
      Parent: data[type=box].hoverlabel
      Type: struct containing one or more of the keys listed below.

      Sets the font used in hover labels.

      • color
        Parent: data[type=box].hoverlabel.font
        Type: color or array of colors
      • family
        Parent: data[type=box].hoverlabel.font
        Type: string or array of strings

        HTML font family - the typeface that will be applied by the web browser. The web browser will only be able to apply a font if it is available on the system which it operates. Provide multiple font families, separated by commas, to indicate the preference in which to apply fonts if they aren't available on the system. The Chart Studio Cloud (at https://chart-studio.plotly.com or on-premise) generates images on a server, where only a select number of fonts are installed and supported. These include 'Arial', 'Balto', 'Courier New', 'Droid Sans', 'Droid Serif', 'Droid Sans Mono', 'Gravitas One', 'Old Standard TT', 'Open Sans', 'Overpass', 'PT Sans Narrow', 'Raleway', 'Times New Roman'.

      • lineposition
        Parent: data[type=box].hoverlabel.font
        Type: flaglist string. Any combination of 'under', 'over', 'through' joined with a '+' OR 'none'.
        Examples: 'under', 'over', 'under+over', 'under+over+through', 'none'
        Default: 'none'

        Sets the kind of decoration line(s) with text, such as an 'under', 'over' or 'through' as well as combinations e.g. 'under+over', etc.

      • shadow
        Parent: data[type=box].hoverlabel.font
        Type: string or array of strings
        Default: 'none'

        Sets the shape and color of the shadow behind text. 'auto' places minimal shadow and applies contrast text font color. See https://developer.mozilla.org/en-US/docs/Web/CSS/text-shadow for additional options.

      • size
        Parent: data[type=box].hoverlabel.font
        Type: number or array of numbers greater than or equal to 1
      • style
        Parent: data[type=box].hoverlabel.font
        Type: enumerated or array of enumerateds , one of ( 'normal' | 'italic' )
        Default: 'normal'

        Sets whether a font should be styled with a normal or italic face from its family.

      • textcase
        Parent: data[type=box].hoverlabel.font
        Type: enumerated or array of enumerateds , one of ( 'normal' | 'word caps' | 'upper' | 'lower' )
        Default: 'normal'

        Sets capitalization of text. It can be used to make text appear in all-uppercase or all-lowercase, or with each word capitalized.

      • variant
        Parent: data[type=box].hoverlabel.font
        Type: enumerated or array of enumerateds , one of ( 'normal' | 'small-caps' | 'all-small-caps' | 'all-petite-caps' | 'petite-caps' | 'unicase' )
        Default: 'normal'

        Sets the variant of the font.

      • weight
        Parent: data[type=box].hoverlabel.font
        Type: integer or array of integers between or equal to 1 and 1000
        Default: normal

        Sets the weight (or boldness) of the font.

    • namelength
      Parent: data[type=box].hoverlabel
      Type: integer or array of integers greater than or equal to -1
      Default: 15

      Sets the default length (in number of characters) of the trace name in the hover labels for all traces. -1 shows the whole name regardless of length. 0-3 shows the first 0-3 characters, and an integer >3 will show the whole name if it is less than that many characters, but if it is longer, will truncate to `namelength - 3` characters and add an ellipsis.

  • hoveron
    Parent: data[type=box]
    Type: flaglist string. Any combination of 'boxes', 'points' joined with a '+'
    Examples: 'boxes', 'points', 'boxes+points'
    Default: 'boxes+points'

    Do the hover effects highlight individual boxes or sample points or both?

  • pointpos
    Parent: data[type=box]
    Type: number between or equal to -2 and 2

    Sets the position of the sample points in relation to the box(es). If '0', the sample points are places over the center of the box(es). Positive (negative) values correspond to positions to the right (left) for vertical boxes and above (below) for horizontal boxes

  • jitter
    Parent: data[type=box]
    Type: number between or equal to 0 and 1

    Sets the amount of jitter in the sample points drawn. If '0', the sample points align along the distribution axis. If '1', the sample points are drawn in a random jitter of width equal to the width of the box(es).

  • sizemode
    Parent: data[type=box]
    Type: enumerated , one of ( 'quartiles' | 'sd' )
    Default: 'quartiles'

    Sets the upper and lower bound for the boxes quartiles means box is drawn between Q1 and Q3 SD means the box is drawn between Mean +- Standard Deviation Argument sdmultiple (default 1) to scale the box size So it could be drawn 1-stddev, 3-stddev etc

  • xcalendar
    Parent: data[type=box]
    Type: enumerated , one of ( 'chinese' | 'coptic' | 'discworld' | 'ethiopian' | 'gregorian' | 'hebrew' | 'islamic' | 'jalali' | 'julian' | 'mayan' | 'nanakshahi' | 'nepali' | 'persian' | 'taiwan' | 'thai' | 'ummalqura' )
    Default: 'gregorian'

    Sets the calendar system to use with `x` date data.

  • ycalendar
    Parent: data[type=box]
    Type: enumerated , one of ( 'chinese' | 'coptic' | 'discworld' | 'ethiopian' | 'gregorian' | 'hebrew' | 'islamic' | 'jalali' | 'julian' | 'mayan' | 'nanakshahi' | 'nepali' | 'persian' | 'taiwan' | 'thai' | 'ummalqura' )
    Default: 'gregorian'

    Sets the calendar system to use with `y` date data.

  • uirevision
    Parent: data[type=box]
    Type: number or categorical coordinate string

    Controls persistence of some user-driven changes to the trace: `constraintrange` in `parcoords` traces, as well as some `editable: true` modifications such as `name` and `colorbar.title`. Defaults to `layout.uirevision`. Note that other user-driven trace attribute changes are controlled by `layout` attributes: `trace.visible` is controlled by `layout.legend.uirevision`, `selectedpoints` is controlled by `layout.selectionrevision`, and `colorbar.(x|y)` (accessible with `config: {editable: true}`) is controlled by `layout.editrevision`. Trace changes are tracked by `uid`, which only falls back on trace index if no `uid` is provided. So if your app can add/remove traces before the end of the `data` array, such that the same trace has a different index, you can still preserve user-driven changes if you give each trace a `uid` that stays with it as it moves.