Sets the trace name. The trace name appears as the legend item and on hover.

Determines whether or not this trace is visible. If "legendonly", the trace is not drawn, but can appear as a legend item (provided that the legend itself is visible).

Determines whether or not an item corresponding to this trace is shown in the legend.

Sets the reference to a legend to show this trace in. References to these legends are "legend", "legend2", "legend3", etc. Settings for these legends are set in the layout, under `layout.legend`, `layout.legend2`, etc.

Sets the legend rank for this trace. Items and groups with smaller ranks are presented on top/left side while with "reversed" `legend.traceorder` they are on bottom/right side. The default legendrank is 1000, so that you can use ranks less than 1000 to place certain items before all unranked items, and ranks greater than 1000 to go after all unranked items. When having unranked or equal rank items shapes would be displayed after traces i.e. according to their order in data and layout.

Sets the legend group for this trace. Traces and shapes part of the same legend group hide/show at the same time when toggling legend items.

• font
  Parent: data[type=splom].legendgrouptitle
  Type: Dict containing one or more of the keys listed below.

  Sets this legend group's title font.

  • color
    Parent: data[type=splom].legendgrouptitle.font
    Type: color
  • family
    Parent: data[type=splom].legendgrouptitle.font
    Type: string

    HTML font family - the typeface that will be applied by the web browser. The web browser can only apply a font if it is available on the system where it runs. Provide multiple font families, separated by commas, to indicate the order in which to apply fonts if they aren't available.

  • lineposition
    Parent: data[type=splom].legendgrouptitle.font
    Type: flaglist string. Any combination of "under", "over", "through" joined with a "+" OR "none".
    Examples: "under", "over", "under+over", "under+over+through", "none"
    Default: "none"

    Sets the kind of decoration line(s) with text, such as an "under", "over" or "through" as well as combinations e.g. "under+over", etc.

  • shadow
    Parent: data[type=splom].legendgrouptitle.font
    Type: string
    Default: "none"

    Sets the shape and color of the shadow behind text. "auto" places minimal shadow and applies contrast text font color. See https://developer.mozilla.org/en-US/docs/Web/CSS/text-shadow for additional options.

  • size
    Parent: data[type=splom].legendgrouptitle.font
    Type: number greater than or equal to 1
  • style
    Parent: data[type=splom].legendgrouptitle.font
    Type: enumerated , one of ( "normal" | "italic" )
    Default: "normal"

    Sets whether a font should be styled with a normal or italic face from its family.

  • textcase
    Parent: data[type=splom].legendgrouptitle.font
    Type: enumerated , one of ( "normal" | "word caps" | "upper" | "lower" )
    Default: "normal"

    Sets capitalization of text. It can be used to make text appear in all-uppercase or all-lowercase, or with each word capitalized.

  • variant
    Parent: data[type=splom].legendgrouptitle.font
    Type: enumerated , one of ( "normal" | "small-caps" | "all-small-caps" | "all-petite-caps" | "petite-caps" | "unicase" )
    Default: "normal"

    Sets the variant of the font.

  • weight
    Parent: data[type=splom].legendgrouptitle.font
    Type: integer between or equal to 1 and 1000
    Default: normal

    Sets the weight (or boldness) of the font.

• text
  Parent: data[type=splom].legendgrouptitle
  Type: string
  Default: ""

  Sets the title of the legend group.

Sets the width (in px or fraction) of the legend for this trace.

Sets the opacity of the trace.

Assigns id labels to each datum. These ids for object constancy of data points during animation. Should be an array of strings, not numbers or any other type.

Sets text elements associated with each (x,y) pair to appear on hover. If a single string, the same string appears over all the data points. If an array of string, the items are mapped in order to the this trace's (x,y) coordinates.

• axis
  Parent: data[type=splom].dimensions[]
  Type: Dict containing one or more of the keys listed below.
  • matches
    Parent: data[type=splom].dimensions[].axis
    Type: boolean

    Determines whether or not the x & y axes generated by this dimension match. Equivalent to setting the `matches` axis attribute in the layout with the correct axis id.

  • type
    Parent: data[type=splom].dimensions[].axis
    Type: enumerated , one of ( "linear" | "log" | "date" | "category" )

    Sets the axis type for this dimension's generated x and y axes. Note that the axis `type` values set in layout take precedence over this attribute.

• label
  Parent: data[type=splom].dimensions[]
  Type: string

  Sets the label corresponding to this splom dimension.

• name
  Parent: data[type=splom].dimensions[]
  Type: string

  When used in a template, named items are created in the output figure in addition to any items the figure already has in this array. You can modify these items in the output figure by making your own item with `templateitemname` matching this `name` alongside your modifications (including `visible: false` or `enabled: false` to hide it). Has no effect outside of a template.

• templateitemname
  Parent: data[type=splom].dimensions[]
  Type: string

  Used to refer to a named item in this array in the template. Named items from the template will be created even without a matching item in the input figure, but you can modify one by making an item with `templateitemname` matching its `name`, alongside your modifications (including `visible: false` or `enabled: false` to hide it). If there is no template or no matching item, this item will be hidden unless you explicitly show it with `visible: true`.

• values
  Parent: data[type=splom].dimensions[]
  Type: data array, Vector

  Sets the dimension values to be plotted.

• visible
  Parent: data[type=splom].dimensions[]
  Type: boolean
  Default: true

  Determines whether or not this dimension is shown on the graph. Note that even visible false dimension contribute to the default grid generate by this splom trace.

Same as `text`.

Determines which trace information appear on hover. If `none` or `skip` are set, no information is displayed upon hovering. But, if `none` is set, click and hover events are still fired.

Template string used for rendering the information that appear on hover box. Note that this will override `hoverinfo`. Variables are inserted using %{variable}, for example "y: %{y}" as well as %{xother}, {%_xother}, {%_xother_}, {%xother_}. When showing info for several points, "xother" will be added to those with different x positions from the first point. An underscore before or after "(x|y)other" will add a space on that side, only when this field is shown. Numbers are formatted using d3-format's syntax %{variable:d3-format}, for example "Price: %{y:$.2f}". https://github.com/d3/d3-format/tree/v1.4.5#d3-format for details on the formatting syntax. Dates are formatted using d3-time-format's syntax %{variable|d3-time-format}, for example "Day: %{2019-01-01|%A}". https://github.com/d3/d3-time-format/tree/v2.2.3#locale_format for details on the date formatting syntax. The variables available in `hovertemplate` are the ones emitted as event data described at this link https://plotly.com/javascript/plotlyjs-events/#event-data. Additionally, every attributes that can be specified per-point (the ones that are `arrayOk: true`) are available. Anything contained in tag `<extra>` is displayed in the secondary box, for example `<extra>%{fullData.name}</extra>`. To hide the secondary box completely, use an empty tag `<extra></extra>`.

Sets the hover text formatting rulefor `x` using d3 formatting mini-languages which are very similar to those in Python. For numbers, see: https://github.com/d3/d3-format/tree/v1.4.5#d3-format. And for dates see: https://github.com/d3/d3-time-format/tree/v2.2.3#locale_format. We add two items to d3's date formatter: "%h" for half of the year as a decimal number as well as "%{n}f" for fractional seconds with n digits. For example, "2016-10-13 09:15:23.456" with tickformat "%H~%M~%S.%2f" would display "09~15~23.46"By default the values are formatted using `xaxis.hoverformat`.

Sets the hover text formatting rulefor `y` using d3 formatting mini-languages which are very similar to those in Python. For numbers, see: https://github.com/d3/d3-format/tree/v1.4.5#d3-format. And for dates see: https://github.com/d3/d3-time-format/tree/v2.2.3#locale_format. We add two items to d3's date formatter: "%h" for half of the year as a decimal number as well as "%{n}f" for fractional seconds with n digits. For example, "2016-10-13 09:15:23.456" with tickformat "%H~%M~%S.%2f" would display "09~15~23.46"By default the values are formatted using `yaxis.hoverformat`.

Assigns extra meta information associated with this trace that can be used in various text attributes. Attributes such as trace `name`, graph, axis and colorbar `title.text`, annotation `text` `rangeselector`, `updatemenues` and `sliders` `label` text all support `meta`. To access the trace `meta` values in an attribute in the same trace, simply use `%{meta[i]}` where `i` is the index or key of the `meta` item in question. To access trace `meta` in layout attributes, use `%{data[n[.meta[i]}` where `i` is the index or key of the `meta` and `n` is the trace index.

Assigns extra data each datum. This may be useful when listening to hover, click and selection events. Note that, "scatter" traces also appends customdata items in the markers DOM elements

• angle
  Parent: data[type=splom].marker
  Type: angle
  Default: 0

  Sets the marker angle in respect to `angleref`.

• autocolorscale
  Parent: data[type=splom].marker
  Type: boolean
  Default: true

  Determines whether the colorscale is a default palette (`autocolorscale: true`) or the palette determined by `marker.colorscale`. Has an effect only if in `marker.color` is set to a numerical array. In case `colorscale` is unspecified or `autocolorscale` is true, the default palette will be chosen according to whether numbers in the `color` array are all positive, all negative or mixed.

• cauto
  Parent: data[type=splom].marker
  Type: boolean
  Default: true

  Determines whether or not the color domain is computed with respect to the input data (here in `marker.color`) or the bounds set in `marker.cmin` and `marker.cmax` Has an effect only if in `marker.color` is set to a numerical array. Defaults to `false` when `marker.cmin` and `marker.cmax` are set by the user.

• cmax
  Parent: data[type=splom].marker
  Type: number

  Sets the upper bound of the color domain. Has an effect only if in `marker.color` is set to a numerical array. Value should have the same units as in `marker.color` and if set, `marker.cmin` must be set as well.

• cmid
  Parent: data[type=splom].marker
  Type: number

  Sets the mid-point of the color domain by scaling `marker.cmin` and/or `marker.cmax` to be equidistant to this point. Has an effect only if in `marker.color` is set to a numerical array. Value should have the same units as in `marker.color`. Has no effect when `marker.cauto` is `false`.

• cmin
  Parent: data[type=splom].marker
  Type: number

  Sets the lower bound of the color domain. Has an effect only if in `marker.color` is set to a numerical array. Value should have the same units as in `marker.color` and if set, `marker.cmax` must be set as well.

• color
  Parent: data[type=splom].marker
  Type: color or array of colors

  Sets the marker color. It accepts either a specific color or an array of numbers that are mapped to the colorscale relative to the max and min values of the array or relative to `marker.cmin` and `marker.cmax` if set.

• coloraxis
  Parent: data[type=splom].marker
  Type: subplotid

  Sets a reference to a shared color axis. References to these shared color axes are "coloraxis", "coloraxis2", "coloraxis3", etc. Settings for these shared color axes are set in the layout, under `layout.coloraxis`, `layout.coloraxis2`, etc. Note that multiple color scales can be linked to the same color axis.

• colorbar
  Parent: data[type=splom].marker
  Type: Dict containing one or more of the keys listed below.
  • bgcolor
    Parent: data[type=splom].marker.colorbar
    Type: color
    Default: "rgba(0,0,0,0)"

    Sets the color of padded area.

  • bordercolor
    Parent: data[type=splom].marker.colorbar
    Type: color
    Default: "#444"

    Sets the axis line color.

  • borderwidth
    Parent: data[type=splom].marker.colorbar
    Type: number greater than or equal to 0
    Default: 0

    Sets the width (in px) or the border enclosing this color bar.

  • dtick
    Parent: data[type=splom].marker.colorbar
    Type: number or categorical coordinate string

    Sets the step in-between ticks on this axis. Use with `tick0`. Must be a positive number, or special strings available to "log" and "date" axes. If the axis `type` is "log", then ticks are set every 10^(n"dtick) where n is the tick number. For example, to set a tick mark at 1, 10, 100, 1000, ... set dtick to 1. To set tick marks at 1, 100, 10000, ... set dtick to 2. To set tick marks at 1, 5, 25, 125, 625, 3125, ... set dtick to log_10(5), or 0.69897000433. "log" has several special values; "L<f>", where `f` is a positive number, gives ticks linearly spaced in value (but not position). For example `tick0` = 0.1, `dtick` = "L0.5" will put ticks at 0.1, 0.6, 1.1, 1.6 etc. To show powers of 10 plus small digits between, use "D1" (all digits) or "D2" (only 2 and 5). `tick0` is ignored for "D1" and "D2". If the axis `type` is "date", then you must convert the time to milliseconds. For example, to set the interval between ticks to one day, set `dtick` to 86400000.0. "date" also has special values "M<n>" gives ticks spaced by a number of months. `n` must be a positive integer. To set ticks on the 15th of every third month, set `tick0` to "2000-01-15" and `dtick` to "M3". To set ticks every 4 years, set `dtick` to "M48"

  • exponentformat
    Parent: data[type=splom].marker.colorbar
    Type: enumerated , one of ( "none" | "e" | "E" | "power" | "SI" | "B" )
    Default: "B"

    Determines a formatting rule for the tick exponents. For example, consider the number 1,000,000,000. If "none", it appears as 1,000,000,000. If "e", 1e+9. If "E", 1E+9. If "power", 1x10^9 (with 9 in a super script). If "SI", 1G. If "B", 1B.

  • labelalias
    Parent: data[type=splom].marker.colorbar
    Type: number or categorical coordinate string

    Replacement text for specific tick or hover labels. For example using {US: 'USA', CA: 'Canada'} changes US to USA and CA to Canada. The labels we would have shown must match the keys exactly, after adding any tickprefix or ticksuffix. For negative numbers the minus sign symbol used (U+2212) is wider than the regular ascii dash. That means you need to use −1 instead of -1. labelalias can be used with any axis type, and both keys (if needed) and values (if desired) can include html-like tags or MathJax.

  • len
    Parent: data[type=splom].marker.colorbar
    Type: number greater than or equal to 0
    Default: 1

    Sets the length of the color bar This measure excludes the padding of both ends. That is, the color bar length is this length minus the padding on both ends.

  • lenmode
    Parent: data[type=splom].marker.colorbar
    Type: enumerated , one of ( "fraction" | "pixels" )
    Default: "fraction"

    Determines whether this color bar's length (i.e. the measure in the color variation direction) is set in units of plot "fraction" or in "pixels. Use `len` to set the value.

  • minexponent
    Parent: data[type=splom].marker.colorbar
    Type: number greater than or equal to 0
    Default: 3

    Hide SI prefix for 10^n if |n| is below this number. This only has an effect when `tickformat` is "SI" or "B".

  • nticks
    Parent: data[type=splom].marker.colorbar
    Type: integer greater than or equal to 0
    Default: 0

    Specifies the maximum number of ticks for the particular axis. The actual number of ticks will be chosen automatically to be less than or equal to `nticks`. Has an effect only if `tickmode` is set to "auto".

  • orientation
    Parent: data[type=splom].marker.colorbar
    Type: enumerated , one of ( "h" | "v" )
    Default: "v"

    Sets the orientation of the colorbar.

  • outlinecolor
    Parent: data[type=splom].marker.colorbar
    Type: color
    Default: "#444"

    Sets the axis line color.

  • outlinewidth
    Parent: data[type=splom].marker.colorbar
    Type: number greater than or equal to 0
    Default: 1

    Sets the width (in px) of the axis line.

  • separatethousands
    Parent: data[type=splom].marker.colorbar
    Type: boolean

    If "true", even 4-digit integers are separated

  • showexponent
    Parent: data[type=splom].marker.colorbar
    Type: enumerated , one of ( "all" | "first" | "last" | "none" )
    Default: "all"

    If "all", all exponents are shown besides their significands. If "first", only the exponent of the first tick is shown. If "last", only the exponent of the last tick is shown. If "none", no exponents appear.

  • showticklabels
    Parent: data[type=splom].marker.colorbar
    Type: boolean
    Default: true

    Determines whether or not the tick labels are drawn.

  • showtickprefix
    Parent: data[type=splom].marker.colorbar
    Type: enumerated , one of ( "all" | "first" | "last" | "none" )
    Default: "all"

    If "all", all tick labels are displayed with a prefix. If "first", only the first tick is displayed with a prefix. If "last", only the last tick is displayed with a suffix. If "none", tick prefixes are hidden.

  • showticksuffix
    Parent: data[type=splom].marker.colorbar
    Type: enumerated , one of ( "all" | "first" | "last" | "none" )
    Default: "all"

    Same as `showtickprefix` but for tick suffixes.

  • thickness
    Parent: data[type=splom].marker.colorbar
    Type: number greater than or equal to 0
    Default: 30

    Sets the thickness of the color bar This measure excludes the size of the padding, ticks and labels.

  • thicknessmode
    Parent: data[type=splom].marker.colorbar
    Type: enumerated , one of ( "fraction" | "pixels" )
    Default: "pixels"

    Determines whether this color bar's thickness (i.e. the measure in the constant color direction) is set in units of plot "fraction" or in "pixels". Use `thickness` to set the value.

  • tick0
    Parent: data[type=splom].marker.colorbar
    Type: number or categorical coordinate string

    Sets the placement of the first tick on this axis. Use with `dtick`. If the axis `type` is "log", then you must take the log of your starting tick (e.g. to set the starting tick to 100, set the `tick0` to 2) except when `dtick`="L<f>" (see `dtick` for more info). If the axis `type` is "date", it should be a date string, like date data. If the axis `type` is "category", it should be a number, using the scale where each category is assigned a serial number from zero in the order it appears.

  • tickangle
    Parent: data[type=splom].marker.colorbar
    Type: angle
    Default: "auto"

    Sets the angle of the tick labels with respect to the horizontal. For example, a `tickangle` of -90 draws the tick labels vertically.

  • tickcolor
    Parent: data[type=splom].marker.colorbar
    Type: color
    Default: "#444"

    Sets the tick color.

  • tickfont
    Parent: data[type=splom].marker.colorbar
    Type: Dict containing one or more of the keys listed below.

    Sets the color bar's tick label font

    • color
      Parent: data[type=splom].marker.colorbar.tickfont
      Type: color
    • family
      Parent: data[type=splom].marker.colorbar.tickfont
      Type: string

      HTML font family - the typeface that will be applied by the web browser. The web browser can only apply a font if it is available on the system where it runs. Provide multiple font families, separated by commas, to indicate the order in which to apply fonts if they aren't available.

    • lineposition
      Parent: data[type=splom].marker.colorbar.tickfont
      Type: flaglist string. Any combination of "under", "over", "through" joined with a "+" OR "none".
      Examples: "under", "over", "under+over", "under+over+through", "none"
      Default: "none"

      Sets the kind of decoration line(s) with text, such as an "under", "over" or "through" as well as combinations e.g. "under+over", etc.

    • shadow
      Parent: data[type=splom].marker.colorbar.tickfont
      Type: string
      Default: "none"

      Sets the shape and color of the shadow behind text. "auto" places minimal shadow and applies contrast text font color. See https://developer.mozilla.org/en-US/docs/Web/CSS/text-shadow for additional options.

    • size
      Parent: data[type=splom].marker.colorbar.tickfont
      Type: number greater than or equal to 1
    • style
      Parent: data[type=splom].marker.colorbar.tickfont
      Type: enumerated , one of ( "normal" | "italic" )
      Default: "normal"

      Sets whether a font should be styled with a normal or italic face from its family.

    • textcase
      Parent: data[type=splom].marker.colorbar.tickfont
      Type: enumerated , one of ( "normal" | "word caps" | "upper" | "lower" )
      Default: "normal"

      Sets capitalization of text. It can be used to make text appear in all-uppercase or all-lowercase, or with each word capitalized.

    • variant
      Parent: data[type=splom].marker.colorbar.tickfont
      Type: enumerated , one of ( "normal" | "small-caps" | "all-small-caps" | "all-petite-caps" | "petite-caps" | "unicase" )
      Default: "normal"

      Sets the variant of the font.

    • weight
      Parent: data[type=splom].marker.colorbar.tickfont
      Type: integer between or equal to 1 and 1000
      Default: normal

      Sets the weight (or boldness) of the font.

  • tickformat
    Parent: data[type=splom].marker.colorbar
    Type: string
    Default: ""

    Sets the tick label formatting rule using d3 formatting mini-languages which are very similar to those in Python. For numbers, see: https://github.com/d3/d3-format/tree/v1.4.5#d3-format. And for dates see: https://github.com/d3/d3-time-format/tree/v2.2.3#locale_format. We add two items to d3's date formatter: "%h" for half of the year as a decimal number as well as "%{n}f" for fractional seconds with n digits. For example, "2016-10-13 09:15:23.456" with tickformat "%H~%M~%S.%2f" would display "09~15~23.46"

  • tickformatstops
    Parent: data[type=splom].marker.colorbar
    Type: Array of Dict where each Dict has one or more of the keys listed below.
    • dtickrange
      Parent: data[type=splom].marker.colorbar.tickformatstops[]
      Type: Array

      range ["min", "max"], where "min", "max" - dtick values which describe some zoom level, it is possible to omit "min" or "max" value by passing "null"

    • enabled
      Parent: data[type=splom].marker.colorbar.tickformatstops[]
      Type: boolean
      Default: true

      Determines whether or not this stop is used. If `false`, this stop is ignored even within its `dtickrange`.

    • name
      Parent: data[type=splom].marker.colorbar.tickformatstops[]
      Type: string

      When used in a template, named items are created in the output figure in addition to any items the figure already has in this array. You can modify these items in the output figure by making your own item with `templateitemname` matching this `name` alongside your modifications (including `visible: false` or `enabled: false` to hide it). Has no effect outside of a template.

    • templateitemname
      Parent: data[type=splom].marker.colorbar.tickformatstops[]
      Type: string

      Used to refer to a named item in this array in the template. Named items from the template will be created even without a matching item in the input figure, but you can modify one by making an item with `templateitemname` matching its `name`, alongside your modifications (including `visible: false` or `enabled: false` to hide it). If there is no template or no matching item, this item will be hidden unless you explicitly show it with `visible: true`.

    • value
      Parent: data[type=splom].marker.colorbar.tickformatstops[]
      Type: string
      Default: ""

      string - dtickformat for described zoom level, the same as "tickformat"

  • ticklabeloverflow
    Parent: data[type=splom].marker.colorbar
    Type: enumerated , one of ( "allow" | "hide past div" | "hide past domain" )

    Determines how we handle tick labels that would overflow either the graph div or the domain of the axis. The default value for inside tick labels is "hide past domain". In other cases the default is "hide past div".

  • ticklabelposition
    Parent: data[type=splom].marker.colorbar
    Type: enumerated , one of ( "outside" | "inside" | "outside top" | "inside top" | "outside left" | "inside left" | "outside right" | "inside right" | "outside bottom" | "inside bottom" )
    Default: "outside"

    Determines where tick labels are drawn relative to the ticks. Left and right options are used when `orientation` is "h", top and bottom when `orientation` is "v".

  • ticklabelstep
    Parent: data[type=splom].marker.colorbar
    Type: integer greater than or equal to 1
    Default: 1

    Sets the spacing between tick labels as compared to the spacing between ticks. A value of 1 (default) means each tick gets a label. A value of 2 means shows every 2nd label. A larger value n means only every nth tick is labeled. `tick0` determines which labels are shown. Not implemented for axes with `type` "log" or "multicategory", or when `tickmode` is "array".

  • ticklen
    Parent: data[type=splom].marker.colorbar
    Type: number greater than or equal to 0
    Default: 5

    Sets the tick length (in px).

  • tickmode
    Parent: data[type=splom].marker.colorbar
    Type: enumerated , one of ( "auto" | "linear" | "array" )

    Sets the tick mode for this axis. If "auto", the number of ticks is set via `nticks`. If "linear", the placement of the ticks is determined by a starting position `tick0` and a tick step `dtick` ("linear" is the default value if `tick0` and `dtick` are provided). If "array", the placement of the ticks is set via `tickvals` and the tick text is `ticktext`. ("array" is the default value if `tickvals` is provided).

  • tickprefix
    Parent: data[type=splom].marker.colorbar
    Type: string
    Default: ""

    Sets a tick label prefix.

  • ticks
    Parent: data[type=splom].marker.colorbar
    Type: enumerated , one of ( "outside" | "inside" | "" )
    Default: ""

    Determines whether ticks are drawn or not. If "", this axis' ticks are not drawn. If "outside" ("inside"), this axis' are drawn outside (inside) the axis lines.

  • ticksuffix
    Parent: data[type=splom].marker.colorbar
    Type: string
    Default: ""

    Sets a tick label suffix.

  • ticktext
    Parent: data[type=splom].marker.colorbar
    Type: data array, Vector

    Sets the text displayed at the ticks position via `tickvals`. Only has an effect if `tickmode` is set to "array". Used with `tickvals`.

  • tickvals
    Parent: data[type=splom].marker.colorbar
    Type: data array, Vector

    Sets the values at which ticks on this axis appear. Only has an effect if `tickmode` is set to "array". Used with `ticktext`.

  • tickwidth
    Parent: data[type=splom].marker.colorbar
    Type: number greater than or equal to 0
    Default: 1

    Sets the tick width (in px).

  • title
    Parent: data[type=splom].marker.colorbar
    Type: Dict containing one or more of the keys listed below.
    • font
      Parent: data[type=splom].marker.colorbar.title
      Type: Dict containing one or more of the keys listed below.

      Sets this color bar's title font.

      • color
        Parent: data[type=splom].marker.colorbar.title.font
        Type: color
      • family
        Parent: data[type=splom].marker.colorbar.title.font
        Type: string

        HTML font family - the typeface that will be applied by the web browser. The web browser can only apply a font if it is available on the system where it runs. Provide multiple font families, separated by commas, to indicate the order in which to apply fonts if they aren't available.

      • lineposition
        Parent: data[type=splom].marker.colorbar.title.font
        Type: flaglist string. Any combination of "under", "over", "through" joined with a "+" OR "none".
        Examples: "under", "over", "under+over", "under+over+through", "none"
        Default: "none"

        Sets the kind of decoration line(s) with text, such as an "under", "over" or "through" as well as combinations e.g. "under+over", etc.

      • shadow
        Parent: data[type=splom].marker.colorbar.title.font
        Type: string
        Default: "none"

        Sets the shape and color of the shadow behind text. "auto" places minimal shadow and applies contrast text font color. See https://developer.mozilla.org/en-US/docs/Web/CSS/text-shadow for additional options.

      • size
        Parent: data[type=splom].marker.colorbar.title.font
        Type: number greater than or equal to 1
      • style
        Parent: data[type=splom].marker.colorbar.title.font
        Type: enumerated , one of ( "normal" | "italic" )
        Default: "normal"

        Sets whether a font should be styled with a normal or italic face from its family.

      • textcase
        Parent: data[type=splom].marker.colorbar.title.font
        Type: enumerated , one of ( "normal" | "word caps" | "upper" | "lower" )
        Default: "normal"

        Sets capitalization of text. It can be used to make text appear in all-uppercase or all-lowercase, or with each word capitalized.

      • variant
        Parent: data[type=splom].marker.colorbar.title.font
        Type: enumerated , one of ( "normal" | "small-caps" | "all-small-caps" | "all-petite-caps" | "petite-caps" | "unicase" )
        Default: "normal"

        Sets the variant of the font.

      • weight
        Parent: data[type=splom].marker.colorbar.title.font
        Type: integer between or equal to 1 and 1000
        Default: normal

        Sets the weight (or boldness) of the font.

    • side
      Parent: data[type=splom].marker.colorbar.title
      Type: enumerated , one of ( "right" | "top" | "bottom" )

      Determines the location of color bar's title with respect to the color bar. Defaults to "top" when `orientation` if "v" and defaults to "right" when `orientation` if "h".

    • text
      Parent: data[type=splom].marker.colorbar.title
      Type: string

      Sets the title of the color bar.

  • x
    Parent: data[type=splom].marker.colorbar
    Type: number

    Sets the x position with respect to `xref` of the color bar (in plot fraction). When `xref` is "paper", defaults to 1.02 when `orientation` is "v" and 0.5 when `orientation` is "h". When `xref` is "container", defaults to "1" when `orientation` is "v" and 0.5 when `orientation` is "h". Must be between "0" and "1" if `xref` is "container" and between "-2" and "3" if `xref` is "paper".

  • xanchor
    Parent: data[type=splom].marker.colorbar
    Type: enumerated , one of ( "left" | "center" | "right" )

    Sets this color bar's horizontal position anchor. This anchor binds the `x` position to the "left", "center" or "right" of the color bar. Defaults to "left" when `orientation` is "v" and "center" when `orientation` is "h".

  • xpad
    Parent: data[type=splom].marker.colorbar
    Type: number greater than or equal to 0
    Default: 10

    Sets the amount of padding (in px) along the x direction.

  • xref
    Parent: data[type=splom].marker.colorbar
    Type: enumerated , one of ( "container" | "paper" )
    Default: "paper"

    Sets the container `x` refers to. "container" spans the entire `width` of the plot. "paper" refers to the width of the plotting area only.

  • y
    Parent: data[type=splom].marker.colorbar
    Type: number

    Sets the y position with respect to `yref` of the color bar (in plot fraction). When `yref` is "paper", defaults to 0.5 when `orientation` is "v" and 1.02 when `orientation` is "h". When `yref` is "container", defaults to 0.5 when `orientation` is "v" and 1 when `orientation` is "h". Must be between "0" and "1" if `yref` is "container" and between "-2" and "3" if `yref` is "paper".

  • yanchor
    Parent: data[type=splom].marker.colorbar
    Type: enumerated , one of ( "top" | "middle" | "bottom" )

    Sets this color bar's vertical position anchor This anchor binds the `y` position to the "top", "middle" or "bottom" of the color bar. Defaults to "middle" when `orientation` is "v" and "bottom" when `orientation` is "h".

  • ypad
    Parent: data[type=splom].marker.colorbar
    Type: number greater than or equal to 0
    Default: 10

    Sets the amount of padding (in px) along the y direction.

  • yref
    Parent: data[type=splom].marker.colorbar
    Type: enumerated , one of ( "container" | "paper" )
    Default: "paper"

    Sets the container `y` refers to. "container" spans the entire `height` of the plot. "paper" refers to the height of the plotting area only.

• colorscale
  Parent: data[type=splom].marker
  Type: colorscale

  Sets the colorscale. Has an effect only if in `marker.color` is set to a numerical array. The colorscale must be an array containing arrays mapping a normalized value to an rgb, rgba, hex, hsl, hsv, or named color string. At minimum, a mapping for the lowest (0) and highest (1) values are required. For example, `[[0, 'rgb(0,0,255)'], [1, 'rgb(255,0,0)']]`. To control the bounds of the colorscale in color space, use `marker.cmin` and `marker.cmax`. Alternatively, `colorscale` may be a palette name string of the following list: Blackbody,Bluered,Blues,Cividis,Earth,Electric,Greens,Greys,Hot,Jet,Picnic,Portland,Rainbow,RdBu,Reds,Viridis,YlGnBu,YlOrRd.

• line
  Parent: data[type=splom].marker
  Type: Dict containing one or more of the keys listed below.
  • autocolorscale
    Parent: data[type=splom].marker.line
    Type: boolean
    Default: true

    Determines whether the colorscale is a default palette (`autocolorscale: true`) or the palette determined by `marker.line.colorscale`. Has an effect only if in `marker.line.color` is set to a numerical array. In case `colorscale` is unspecified or `autocolorscale` is true, the default palette will be chosen according to whether numbers in the `color` array are all positive, all negative or mixed.

  • cauto
    Parent: data[type=splom].marker.line
    Type: boolean
    Default: true

    Determines whether or not the color domain is computed with respect to the input data (here in `marker.line.color`) or the bounds set in `marker.line.cmin` and `marker.line.cmax` Has an effect only if in `marker.line.color` is set to a numerical array. Defaults to `false` when `marker.line.cmin` and `marker.line.cmax` are set by the user.

  • cmax
    Parent: data[type=splom].marker.line
    Type: number

    Sets the upper bound of the color domain. Has an effect only if in `marker.line.color` is set to a numerical array. Value should have the same units as in `marker.line.color` and if set, `marker.line.cmin` must be set as well.

  • cmid
    Parent: data[type=splom].marker.line
    Type: number

    Sets the mid-point of the color domain by scaling `marker.line.cmin` and/or `marker.line.cmax` to be equidistant to this point. Has an effect only if in `marker.line.color` is set to a numerical array. Value should have the same units as in `marker.line.color`. Has no effect when `marker.line.cauto` is `false`.

  • cmin
    Parent: data[type=splom].marker.line
    Type: number

    Sets the lower bound of the color domain. Has an effect only if in `marker.line.color` is set to a numerical array. Value should have the same units as in `marker.line.color` and if set, `marker.line.cmax` must be set as well.

  • color
    Parent: data[type=splom].marker.line
    Type: color or array of colors

    Sets the marker.line color. It accepts either a specific color or an array of numbers that are mapped to the colorscale relative to the max and min values of the array or relative to `marker.line.cmin` and `marker.line.cmax` if set.

  • coloraxis
    Parent: data[type=splom].marker.line
    Type: subplotid

    Sets a reference to a shared color axis. References to these shared color axes are "coloraxis", "coloraxis2", "coloraxis3", etc. Settings for these shared color axes are set in the layout, under `layout.coloraxis`, `layout.coloraxis2`, etc. Note that multiple color scales can be linked to the same color axis.

  • colorscale
    Parent: data[type=splom].marker.line
    Type: colorscale

    Sets the colorscale. Has an effect only if in `marker.line.color` is set to a numerical array. The colorscale must be an array containing arrays mapping a normalized value to an rgb, rgba, hex, hsl, hsv, or named color string. At minimum, a mapping for the lowest (0) and highest (1) values are required. For example, `[[0, 'rgb(0,0,255)'], [1, 'rgb(255,0,0)']]`. To control the bounds of the colorscale in color space, use `marker.line.cmin` and `marker.line.cmax`. Alternatively, `colorscale` may be a palette name string of the following list: Blackbody,Bluered,Blues,Cividis,Earth,Electric,Greens,Greys,Hot,Jet,Picnic,Portland,Rainbow,RdBu,Reds,Viridis,YlGnBu,YlOrRd.

  • reversescale
    Parent: data[type=splom].marker.line
    Type: boolean

    Reverses the color mapping if true. Has an effect only if in `marker.line.color` is set to a numerical array. If true, `marker.line.cmin` will correspond to the last color in the array and `marker.line.cmax` will correspond to the first color.

  • width
    Parent: data[type=splom].marker.line
    Type: number or array of numbers greater than or equal to 0

    Sets the width (in px) of the lines bounding the marker points.

• opacity
  Parent: data[type=splom].marker
  Type: number or array of numbers between or equal to 0 and 1

  Sets the marker opacity.

• reversescale
  Parent: data[type=splom].marker
  Type: boolean

  Reverses the color mapping if true. Has an effect only if in `marker.color` is set to a numerical array. If true, `marker.cmin` will correspond to the last color in the array and `marker.cmax` will correspond to the first color.

• showscale
  Parent: data[type=splom].marker
  Type: boolean

  Determines whether or not a colorbar is displayed for this trace. Has an effect only if in `marker.color` is set to a numerical array.

• size
  Parent: data[type=splom].marker
  Type: number or array of numbers greater than or equal to 0
  Default: 6

  Sets the marker size (in px).

• sizemin
  Parent: data[type=splom].marker
  Type: number greater than or equal to 0
  Default: 0

  Has an effect only if `marker.size` is set to a numerical array. Sets the minimum size (in px) of the rendered marker points.

• sizemode
  Parent: data[type=splom].marker
  Type: enumerated , one of ( "diameter" | "area" )
  Default: "diameter"

  Has an effect only if `marker.size` is set to a numerical array. Sets the rule for which the data in `size` is converted to pixels.

• sizeref
  Parent: data[type=splom].marker
  Type: number
  Default: 1

  Has an effect only if `marker.size` is set to a numerical array. Sets the scale factor used to determine the rendered size of marker points. Use with `sizemin` and `sizemode`.

• symbol
  Parent: data[type=splom].marker
  Type: enumerated or array of enumerateds , one of ( "0" | "0" | "circle" | "100" | "100" | "circle-open" | "200" | "200" | "circle-dot" | "300" | "300" | "circle-open-dot" | "1" | "1" | "square" | "101" | "101" | "square-open" | "201" | "201" | "square-dot" | "301" | "301" | "square-open-dot" | "2" | "2" | "diamond" | "102" | "102" | "diamond-open" | "202" | "202" | "diamond-dot" | "302" | "302" | "diamond-open-dot" | "3" | "3" | "cross" | "103" | "103" | "cross-open" | "203" | "203" | "cross-dot" | "303" | "303" | "cross-open-dot" | "4" | "4" | "x" | "104" | "104" | "x-open" | "204" | "204" | "x-dot" | "304" | "304" | "x-open-dot" | "5" | "5" | "triangle-up" | "105" | "105" | "triangle-up-open" | "205" | "205" | "triangle-up-dot" | "305" | "305" | "triangle-up-open-dot" | "6" | "6" | "triangle-down" | "106" | "106" | "triangle-down-open" | "206" | "206" | "triangle-down-dot" | "306" | "306" | "triangle-down-open-dot" | "7" | "7" | "triangle-left" | "107" | "107" | "triangle-left-open" | "207" | "207" | "triangle-left-dot" | "307" | "307" | "triangle-left-open-dot" | "8" | "8" | "triangle-right" | "108" | "108" | "triangle-right-open" | "208" | "208" | "triangle-right-dot" | "308" | "308" | "triangle-right-open-dot" | "9" | "9" | "triangle-ne" | "109" | "109" | "triangle-ne-open" | "209" | "209" | "triangle-ne-dot" | "309" | "309" | "triangle-ne-open-dot" | "10" | "10" | "triangle-se" | "110" | "110" | "triangle-se-open" | "210" | "210" | "triangle-se-dot" | "310" | "310" | "triangle-se-open-dot" | "11" | "11" | "triangle-sw" | "111" | "111" | "triangle-sw-open" | "211" | "211" | "triangle-sw-dot" | "311" | "311" | "triangle-sw-open-dot" | "12" | "12" | "triangle-nw" | "112" | "112" | "triangle-nw-open" | "212" | "212" | "triangle-nw-dot" | "312" | "312" | "triangle-nw-open-dot" | "13" | "13" | "pentagon" | "113" | "113" | "pentagon-open" | "213" | "213" | "pentagon-dot" | "313" | "313" | "pentagon-open-dot" | "14" | "14" | "hexagon" | "114" | "114" | "hexagon-open" | "214" | "214" | "hexagon-dot" | "314" | "314" | "hexagon-open-dot" | "15" | "15" | "hexagon2" | "115" | "115" | "hexagon2-open" | "215" | "215" | "hexagon2-dot" | "315" | "315" | "hexagon2-open-dot" | "16" | "16" | "octagon" | "116" | "116" | "octagon-open" | "216" | "216" | "octagon-dot" | "316" | "316" | "octagon-open-dot" | "17" | "17" | "star" | "117" | "117" | "star-open" | "217" | "217" | "star-dot" | "317" | "317" | "star-open-dot" | "18" | "18" | "hexagram" | "118" | "118" | "hexagram-open" | "218" | "218" | "hexagram-dot" | "318" | "318" | "hexagram-open-dot" | "19" | "19" | "star-triangle-up" | "119" | "119" | "star-triangle-up-open" | "219" | "219" | "star-triangle-up-dot" | "319" | "319" | "star-triangle-up-open-dot" | "20" | "20" | "star-triangle-down" | "120" | "120" | "star-triangle-down-open" | "220" | "220" | "star-triangle-down-dot" | "320" | "320" | "star-triangle-down-open-dot" | "21" | "21" | "star-square" | "121" | "121" | "star-square-open" | "221" | "221" | "star-square-dot" | "321" | "321" | "star-square-open-dot" | "22" | "22" | "star-diamond" | "122" | "122" | "star-diamond-open" | "222" | "222" | "star-diamond-dot" | "322" | "322" | "star-diamond-open-dot" | "23" | "23" | "diamond-tall" | "123" | "123" | "diamond-tall-open" | "223" | "223" | "diamond-tall-dot" | "323" | "323" | "diamond-tall-open-dot" | "24" | "24" | "diamond-wide" | "124" | "124" | "diamond-wide-open" | "224" | "224" | "diamond-wide-dot" | "324" | "324" | "diamond-wide-open-dot" | "25" | "25" | "hourglass" | "125" | "125" | "hourglass-open" | "26" | "26" | "bowtie" | "126" | "126" | "bowtie-open" | "27" | "27" | "circle-cross" | "127" | "127" | "circle-cross-open" | "28" | "28" | "circle-x" | "128" | "128" | "circle-x-open" | "29" | "29" | "square-cross" | "129" | "129" | "square-cross-open" | "30" | "30" | "square-x" | "130" | "130" | "square-x-open" | "31" | "31" | "diamond-cross" | "131" | "131" | "diamond-cross-open" | "32" | "32" | "diamond-x" | "132" | "132" | "diamond-x-open" | "33" | "33" | "cross-thin" | "133" | "133" | "cross-thin-open" | "34" | "34" | "x-thin" | "134" | "134" | "x-thin-open" | "35" | "35" | "asterisk" | "135" | "135" | "asterisk-open" | "36" | "36" | "hash" | "136" | "136" | "hash-open" | "236" | "236" | "hash-dot" | "336" | "336" | "hash-open-dot" | "37" | "37" | "y-up" | "137" | "137" | "y-up-open" | "38" | "38" | "y-down" | "138" | "138" | "y-down-open" | "39" | "39" | "y-left" | "139" | "139" | "y-left-open" | "40" | "40" | "y-right" | "140" | "140" | "y-right-open" | "41" | "41" | "line-ew" | "141" | "141" | "line-ew-open" | "42" | "42" | "line-ns" | "142" | "142" | "line-ns-open" | "43" | "43" | "line-ne" | "143" | "143" | "line-ne-open" | "44" | "44" | "line-nw" | "144" | "144" | "line-nw-open" | "45" | "45" | "arrow-up" | "145" | "145" | "arrow-up-open" | "46" | "46" | "arrow-down" | "146" | "146" | "arrow-down-open" | "47" | "47" | "arrow-left" | "147" | "147" | "arrow-left-open" | "48" | "48" | "arrow-right" | "148" | "148" | "arrow-right-open" | "49" | "49" | "arrow-bar-up" | "149" | "149" | "arrow-bar-up-open" | "50" | "50" | "arrow-bar-down" | "150" | "150" | "arrow-bar-down-open" | "51" | "51" | "arrow-bar-left" | "151" | "151" | "arrow-bar-left-open" | "52" | "52" | "arrow-bar-right" | "152" | "152" | "arrow-bar-right-open" | "53" | "53" | "arrow" | "153" | "153" | "arrow-open" | "54" | "54" | "arrow-wide" | "154" | "154" | "arrow-wide-open" )
  Default: "circle"

  Sets the marker symbol type. Adding 100 is equivalent to appending "-open" to a symbol name. Adding 200 is equivalent to appending "-dot" to a symbol name. Adding 300 is equivalent to appending "-open-dot" or "dot-open" to a symbol name.

• visible
  Parent: data[type=splom].diagonal
  Type: boolean
  Default: true

  Determines whether or not subplots on the diagonal are displayed.

Sets the list of x axes corresponding to dimensions of this splom trace. By default, a splom will match the first N xaxes where N is the number of input dimensions. Note that, in case where `diagonal.visible` is false and `showupperhalf` or `showlowerhalf` is false, this splom trace will generate one less x-axis and one less y-axis.

Sets the list of y axes corresponding to dimensions of this splom trace. By default, a splom will match the first N yaxes where N is the number of input dimensions. Note that, in case where `diagonal.visible` is false and `showupperhalf` or `showlowerhalf` is false, this splom trace will generate one less x-axis and one less y-axis.

Determines whether or not subplots on the lower half from the diagonal are displayed.

Determines whether or not subplots on the upper half from the diagonal are displayed.

Array containing integer indices of selected points. Has an effect only for traces that support selections. Note that an empty array means an empty selection where the `unselected` are turned on for all points, whereas, any other non-array values means no selection all where the `selected` and `unselected` styles have no effect.

• marker
  Parent: data[type=splom].selected
  Type: Dict containing one or more of the keys listed below.
  • color
    Parent: data[type=splom].selected.marker
    Type: color

    Sets the marker color of selected points.

  • opacity
    Parent: data[type=splom].selected.marker
    Type: number between or equal to 0 and 1

    Sets the marker opacity of selected points.

  • size
    Parent: data[type=splom].selected.marker
    Type: number greater than or equal to 0

    Sets the marker size of selected points.

• marker
  Parent: data[type=splom].unselected
  Type: Dict containing one or more of the keys listed below.
  • color
    Parent: data[type=splom].unselected.marker
    Type: color

    Sets the marker color of unselected points, applied only when a selection exists.

  • opacity
    Parent: data[type=splom].unselected.marker
    Type: number between or equal to 0 and 1

    Sets the marker opacity of unselected points, applied only when a selection exists.

  • size
    Parent: data[type=splom].unselected.marker
    Type: number greater than or equal to 0

    Sets the marker size of unselected points, applied only when a selection exists.

• align
  Parent: data[type=splom].hoverlabel
  Type: enumerated or array of enumerateds , one of ( "left" | "right" | "auto" )
  Default: "auto"

  Sets the horizontal alignment of the text content within hover label box. Has an effect only if the hover label text spans more two or more lines

• bgcolor
  Parent: data[type=splom].hoverlabel
  Type: color or array of colors

  Sets the background color of the hover labels for this trace

• bordercolor
  Parent: data[type=splom].hoverlabel
  Type: color or array of colors

  Sets the border color of the hover labels for this trace.

• font
  Parent: data[type=splom].hoverlabel
  Type: Dict containing one or more of the keys listed below.

  Sets the font used in hover labels.

  • color
    Parent: data[type=splom].hoverlabel.font
    Type: color or array of colors
  • family
    Parent: data[type=splom].hoverlabel.font
    Type: string or array of strings

    HTML font family - the typeface that will be applied by the web browser. The web browser can only apply a font if it is available on the system where it runs. Provide multiple font families, separated by commas, to indicate the order in which to apply fonts if they aren't available.

  • lineposition
    Parent: data[type=splom].hoverlabel.font
    Type: flaglist string. Any combination of "under", "over", "through" joined with a "+" OR "none".
    Examples: "under", "over", "under+over", "under+over+through", "none"
    Default: "none"

    Sets the kind of decoration line(s) with text, such as an "under", "over" or "through" as well as combinations e.g. "under+over", etc.

  • shadow
    Parent: data[type=splom].hoverlabel.font
    Type: string or array of strings
    Default: "none"

    Sets the shape and color of the shadow behind text. "auto" places minimal shadow and applies contrast text font color. See https://developer.mozilla.org/en-US/docs/Web/CSS/text-shadow for additional options.

  • size
    Parent: data[type=splom].hoverlabel.font
    Type: number or array of numbers greater than or equal to 1
  • style
    Parent: data[type=splom].hoverlabel.font
    Type: enumerated or array of enumerateds , one of ( "normal" | "italic" )
    Default: "normal"

    Sets whether a font should be styled with a normal or italic face from its family.

  • textcase
    Parent: data[type=splom].hoverlabel.font
    Type: enumerated or array of enumerateds , one of ( "normal" | "word caps" | "upper" | "lower" )
    Default: "normal"

    Sets capitalization of text. It can be used to make text appear in all-uppercase or all-lowercase, or with each word capitalized.

  • variant
    Parent: data[type=splom].hoverlabel.font
    Type: enumerated or array of enumerateds , one of ( "normal" | "small-caps" | "all-small-caps" | "all-petite-caps" | "petite-caps" | "unicase" )
    Default: "normal"

    Sets the variant of the font.

  • weight
    Parent: data[type=splom].hoverlabel.font
    Type: integer or array of integers between or equal to 1 and 1000
    Default: normal

    Sets the weight (or boldness) of the font.

• namelength
  Parent: data[type=splom].hoverlabel
  Type: integer or array of integers greater than or equal to -1
  Default: 15

  Sets the default length (in number of characters) of the trace name in the hover labels for all traces. -1 shows the whole name regardless of length. 0-3 shows the first 0-3 characters, and an integer >3 will show the whole name if it is less than that many characters, but if it is longer, will truncate to `namelength - 3` characters and add an ellipsis.

• showarrow
  Parent: data[type=splom].hoverlabel
  Type: boolean
  Default: true

  Sets whether or not to show the hover label arrow/triangle pointing to the data point.

Controls persistence of some user-driven changes to the trace: `constraintrange` in `parcoords` traces, as well as some `editable: true` modifications such as `name` and `colorbar.title`. Defaults to `layout.uirevision`. Note that other user-driven trace attribute changes are controlled by `layout` attributes: `trace.visible` is controlled by `layout.legend.uirevision`, `selectedpoints` is controlled by `layout.selectionrevision`, and `colorbar.(x|y)` (accessible with `config: {editable: true}`) is controlled by `layout.editrevision`. Trace changes are tracked by `uid`, which only falls back on trace index if no `uid` is provided. So if your app can add/remove traces before the end of the `data` array, such that the same trace has a different index, you can still preserve user-driven changes if you give each trace a `uid` that stays with it as it moves.