Sets the trace name. The trace name appears as the legend item and on hover.

• align
  Parent: data[type=indicator].title
  Type: enumerated , one of ( "left" | "center" | "right" )

  Sets the horizontal alignment of the title. It defaults to `center` except for bullet charts for which it defaults to right.

• font
  Parent: data[type=indicator].title
  Type: Dict containing one or more of the keys listed below.

  Set the font used to display the title

  • color
    Parent: data[type=indicator].title.font
    Type: color
  • family
    Parent: data[type=indicator].title.font
    Type: string

    HTML font family - the typeface that will be applied by the web browser. The web browser can only apply a font if it is available on the system where it runs. Provide multiple font families, separated by commas, to indicate the order in which to apply fonts if they aren't available.

  • lineposition
    Parent: data[type=indicator].title.font
    Type: flaglist string. Any combination of "under", "over", "through" joined with a "+" OR "none".
    Examples: "under", "over", "under+over", "under+over+through", "none"
    Default: "none"

    Sets the kind of decoration line(s) with text, such as an "under", "over" or "through" as well as combinations e.g. "under+over", etc.

  • shadow
    Parent: data[type=indicator].title.font
    Type: string
    Default: "none"

    Sets the shape and color of the shadow behind text. "auto" places minimal shadow and applies contrast text font color. See https://developer.mozilla.org/en-US/docs/Web/CSS/text-shadow for additional options.

  • size
    Parent: data[type=indicator].title.font
    Type: number greater than or equal to 1
  • style
    Parent: data[type=indicator].title.font
    Type: enumerated , one of ( "normal" | "italic" )
    Default: "normal"

    Sets whether a font should be styled with a normal or italic face from its family.

  • textcase
    Parent: data[type=indicator].title.font
    Type: enumerated , one of ( "normal" | "word caps" | "upper" | "lower" )
    Default: "normal"

    Sets capitalization of text. It can be used to make text appear in all-uppercase or all-lowercase, or with each word capitalized.

  • variant
    Parent: data[type=indicator].title.font
    Type: enumerated , one of ( "normal" | "small-caps" | "all-small-caps" | "all-petite-caps" | "petite-caps" | "unicase" )
    Default: "normal"

    Sets the variant of the font.

  • weight
    Parent: data[type=indicator].title.font
    Type: integer between or equal to 1 and 1000
    Default: normal

    Sets the weight (or boldness) of the font.

• text
  Parent: data[type=indicator].title
  Type: string

  Sets the title of this indicator.

Determines whether or not this trace is visible. If "legendonly", the trace is not drawn, but can appear as a legend item (provided that the legend itself is visible).

Sets the reference to a legend to show this trace in. References to these legends are "legend", "legend2", "legend3", etc. Settings for these legends are set in the layout, under `layout.legend`, `layout.legend2`, etc.

Sets the legend rank for this trace. Items and groups with smaller ranks are presented on top/left side while with "reversed" `legend.traceorder` they are on bottom/right side. The default legendrank is 1000, so that you can use ranks less than 1000 to place certain items before all unranked items, and ranks greater than 1000 to go after all unranked items. When having unranked or equal rank items shapes would be displayed after traces i.e. according to their order in data and layout.

• font
  Parent: data[type=indicator].legendgrouptitle
  Type: Dict containing one or more of the keys listed below.

  Sets this legend group's title font.

  • color
    Parent: data[type=indicator].legendgrouptitle.font
    Type: color
  • family
    Parent: data[type=indicator].legendgrouptitle.font
    Type: string

    HTML font family - the typeface that will be applied by the web browser. The web browser can only apply a font if it is available on the system where it runs. Provide multiple font families, separated by commas, to indicate the order in which to apply fonts if they aren't available.

  • lineposition
    Parent: data[type=indicator].legendgrouptitle.font
    Type: flaglist string. Any combination of "under", "over", "through" joined with a "+" OR "none".
    Examples: "under", "over", "under+over", "under+over+through", "none"
    Default: "none"

    Sets the kind of decoration line(s) with text, such as an "under", "over" or "through" as well as combinations e.g. "under+over", etc.

  • shadow
    Parent: data[type=indicator].legendgrouptitle.font
    Type: string
    Default: "none"

    Sets the shape and color of the shadow behind text. "auto" places minimal shadow and applies contrast text font color. See https://developer.mozilla.org/en-US/docs/Web/CSS/text-shadow for additional options.

  • size
    Parent: data[type=indicator].legendgrouptitle.font
    Type: number greater than or equal to 1
  • style
    Parent: data[type=indicator].legendgrouptitle.font
    Type: enumerated , one of ( "normal" | "italic" )
    Default: "normal"

    Sets whether a font should be styled with a normal or italic face from its family.

  • textcase
    Parent: data[type=indicator].legendgrouptitle.font
    Type: enumerated , one of ( "normal" | "word caps" | "upper" | "lower" )
    Default: "normal"

    Sets capitalization of text. It can be used to make text appear in all-uppercase or all-lowercase, or with each word capitalized.

  • variant
    Parent: data[type=indicator].legendgrouptitle.font
    Type: enumerated , one of ( "normal" | "small-caps" | "all-small-caps" | "all-petite-caps" | "petite-caps" | "unicase" )
    Default: "normal"

    Sets the variant of the font.

  • weight
    Parent: data[type=indicator].legendgrouptitle.font
    Type: integer between or equal to 1 and 1000
    Default: normal

    Sets the weight (or boldness) of the font.

• text
  Parent: data[type=indicator].legendgrouptitle
  Type: string
  Default: ""

  Sets the title of the legend group.

Sets the width (in px or fraction) of the legend for this trace.

Determines how the value is displayed on the graph. `number` displays the value numerically in text. `delta` displays the difference to a reference value in text. Finally, `gauge` displays the value graphically on an axis.

Assigns id labels to each datum. These ids for object constancy of data points during animation. Should be an array of strings, not numbers or any other type.

Sets the number to be displayed.

Assigns extra meta information associated with this trace that can be used in various text attributes. Attributes such as trace `name`, graph, axis and colorbar `title.text`, annotation `text` `rangeselector`, `updatemenues` and `sliders` `label` text all support `meta`. To access the trace `meta` values in an attribute in the same trace, simply use `%{meta[i]}` where `i` is the index or key of the `meta` item in question. To access trace `meta` in layout attributes, use `%{data[n[.meta[i]}` where `i` is the index or key of the `meta` and `n` is the trace index.

Assigns extra data each datum. This may be useful when listening to hover, click and selection events. Note that, "scatter" traces also appends customdata items in the markers DOM elements

• column
  Parent: data[type=indicator].domain
  Type: integer greater than or equal to 0
  Default: 0

  If there is a layout grid, use the domain for this column in the grid for this indicator trace .

• row
  Parent: data[type=indicator].domain
  Type: integer greater than or equal to 0
  Default: 0

  If there is a layout grid, use the domain for this row in the grid for this indicator trace .

• x
  Parent: data[type=indicator].domain
  Type: Array
  Default: [0, 1]

  Sets the horizontal domain of this indicator trace (in plot fraction).

• y
  Parent: data[type=indicator].domain
  Type: Array
  Default: [0, 1]

  Sets the vertical domain of this indicator trace (in plot fraction).

Sets the horizontal alignment of the `text` within the box. Note that this attribute has no effect if an angular gauge is displayed: in this case, it is always centered

• decreasing
  Parent: data[type=indicator].delta
  Type: Dict containing one or more of the keys listed below.
  • color
    Parent: data[type=indicator].delta.decreasing
    Type: color
    Default: "#FF4136"

    Sets the color for increasing value.

  • symbol
    Parent: data[type=indicator].delta.decreasing
    Type: string
    Default: "▼"

    Sets the symbol to display for increasing value

• font
  Parent: data[type=indicator].delta
  Type: Dict containing one or more of the keys listed below.

  Set the font used to display the delta

  • color
    Parent: data[type=indicator].delta.font
    Type: color
  • family
    Parent: data[type=indicator].delta.font
    Type: string

    HTML font family - the typeface that will be applied by the web browser. The web browser can only apply a font if it is available on the system where it runs. Provide multiple font families, separated by commas, to indicate the order in which to apply fonts if they aren't available.

  • lineposition
    Parent: data[type=indicator].delta.font
    Type: flaglist string. Any combination of "under", "over", "through" joined with a "+" OR "none".
    Examples: "under", "over", "under+over", "under+over+through", "none"
    Default: "none"

    Sets the kind of decoration line(s) with text, such as an "under", "over" or "through" as well as combinations e.g. "under+over", etc.

  • shadow
    Parent: data[type=indicator].delta.font
    Type: string
    Default: "none"

    Sets the shape and color of the shadow behind text. "auto" places minimal shadow and applies contrast text font color. See https://developer.mozilla.org/en-US/docs/Web/CSS/text-shadow for additional options.

  • size
    Parent: data[type=indicator].delta.font
    Type: number greater than or equal to 1
  • style
    Parent: data[type=indicator].delta.font
    Type: enumerated , one of ( "normal" | "italic" )
    Default: "normal"

    Sets whether a font should be styled with a normal or italic face from its family.

  • textcase
    Parent: data[type=indicator].delta.font
    Type: enumerated , one of ( "normal" | "word caps" | "upper" | "lower" )
    Default: "normal"

    Sets capitalization of text. It can be used to make text appear in all-uppercase or all-lowercase, or with each word capitalized.

  • variant
    Parent: data[type=indicator].delta.font
    Type: enumerated , one of ( "normal" | "small-caps" | "all-small-caps" | "all-petite-caps" | "petite-caps" | "unicase" )
    Default: "normal"

    Sets the variant of the font.

  • weight
    Parent: data[type=indicator].delta.font
    Type: integer between or equal to 1 and 1000
    Default: normal

    Sets the weight (or boldness) of the font.

• increasing
  Parent: data[type=indicator].delta
  Type: Dict containing one or more of the keys listed below.
  • color
    Parent: data[type=indicator].delta.increasing
    Type: color
    Default: "#3D9970"

    Sets the color for increasing value.

  • symbol
    Parent: data[type=indicator].delta.increasing
    Type: string
    Default: "▲"

    Sets the symbol to display for increasing value

• position
  Parent: data[type=indicator].delta
  Type: enumerated , one of ( "top" | "bottom" | "left" | "right" )
  Default: "bottom"

  Sets the position of delta with respect to the number.

• prefix
  Parent: data[type=indicator].delta
  Type: string
  Default: ""

  Sets a prefix appearing before the delta.

• reference
  Parent: data[type=indicator].delta
  Type: number

  Sets the reference value to compute the delta. By default, it is set to the current value.

• relative
  Parent: data[type=indicator].delta
  Type: boolean

  Show relative change

• suffix
  Parent: data[type=indicator].delta
  Type: string
  Default: ""

  Sets a suffix appearing next to the delta.

• valueformat
  Parent: data[type=indicator].delta
  Type: string

  Sets the value formatting rule using d3 formatting mini-languages which are very similar to those in Python. For numbers, see: https://github.com/d3/d3-format/tree/v1.4.5#d3-format.

• font
  Parent: data[type=indicator].number
  Type: Dict containing one or more of the keys listed below.

  Set the font used to display main number

  • color
    Parent: data[type=indicator].number.font
    Type: color
  • family
    Parent: data[type=indicator].number.font
    Type: string

    HTML font family - the typeface that will be applied by the web browser. The web browser can only apply a font if it is available on the system where it runs. Provide multiple font families, separated by commas, to indicate the order in which to apply fonts if they aren't available.

  • lineposition
    Parent: data[type=indicator].number.font
    Type: flaglist string. Any combination of "under", "over", "through" joined with a "+" OR "none".
    Examples: "under", "over", "under+over", "under+over+through", "none"
    Default: "none"

    Sets the kind of decoration line(s) with text, such as an "under", "over" or "through" as well as combinations e.g. "under+over", etc.

  • shadow
    Parent: data[type=indicator].number.font
    Type: string
    Default: "none"

    Sets the shape and color of the shadow behind text. "auto" places minimal shadow and applies contrast text font color. See https://developer.mozilla.org/en-US/docs/Web/CSS/text-shadow for additional options.

  • size
    Parent: data[type=indicator].number.font
    Type: number greater than or equal to 1
  • style
    Parent: data[type=indicator].number.font
    Type: enumerated , one of ( "normal" | "italic" )
    Default: "normal"

    Sets whether a font should be styled with a normal or italic face from its family.

  • textcase
    Parent: data[type=indicator].number.font
    Type: enumerated , one of ( "normal" | "word caps" | "upper" | "lower" )
    Default: "normal"

    Sets capitalization of text. It can be used to make text appear in all-uppercase or all-lowercase, or with each word capitalized.

  • variant
    Parent: data[type=indicator].number.font
    Type: enumerated , one of ( "normal" | "small-caps" | "all-small-caps" | "all-petite-caps" | "petite-caps" | "unicase" )
    Default: "normal"

    Sets the variant of the font.

  • weight
    Parent: data[type=indicator].number.font
    Type: integer between or equal to 1 and 1000
    Default: normal

    Sets the weight (or boldness) of the font.

• prefix
  Parent: data[type=indicator].number
  Type: string
  Default: ""

  Sets a prefix appearing before the number.

• suffix
  Parent: data[type=indicator].number
  Type: string
  Default: ""

  Sets a suffix appearing next to the number.

• valueformat
  Parent: data[type=indicator].number
  Type: string
  Default: ""

  Sets the value formatting rule using d3 formatting mini-languages which are very similar to those in Python. For numbers, see: https://github.com/d3/d3-format/tree/v1.4.5#d3-format.

The gauge of the Indicator plot.

• axis
  Parent: data[type=indicator].gauge
  Type: Dict containing one or more of the keys listed below.
  • dtick
    Parent: data[type=indicator].gauge.axis
    Type: number or categorical coordinate string

    Sets the step in-between ticks on this axis. Use with `tick0`. Must be a positive number, or special strings available to "log" and "date" axes. If the axis `type` is "log", then ticks are set every 10^(n"dtick) where n is the tick number. For example, to set a tick mark at 1, 10, 100, 1000, ... set dtick to 1. To set tick marks at 1, 100, 10000, ... set dtick to 2. To set tick marks at 1, 5, 25, 125, 625, 3125, ... set dtick to log_10(5), or 0.69897000433. "log" has several special values; "L<f>", where `f` is a positive number, gives ticks linearly spaced in value (but not position). For example `tick0` = 0.1, `dtick` = "L0.5" will put ticks at 0.1, 0.6, 1.1, 1.6 etc. To show powers of 10 plus small digits between, use "D1" (all digits) or "D2" (only 2 and 5). `tick0` is ignored for "D1" and "D2". If the axis `type` is "date", then you must convert the time to milliseconds. For example, to set the interval between ticks to one day, set `dtick` to 86400000.0. "date" also has special values "M<n>" gives ticks spaced by a number of months. `n` must be a positive integer. To set ticks on the 15th of every third month, set `tick0` to "2000-01-15" and `dtick` to "M3". To set ticks every 4 years, set `dtick` to "M48"

  • exponentformat
    Parent: data[type=indicator].gauge.axis
    Type: enumerated , one of ( "none" | "e" | "E" | "power" | "SI" | "B" )
    Default: "B"

    Determines a formatting rule for the tick exponents. For example, consider the number 1,000,000,000. If "none", it appears as 1,000,000,000. If "e", 1e+9. If "E", 1E+9. If "power", 1x10^9 (with 9 in a super script). If "SI", 1G. If "B", 1B.

  • labelalias
    Parent: data[type=indicator].gauge.axis
    Type: number or categorical coordinate string

    Replacement text for specific tick or hover labels. For example using {US: 'USA', CA: 'Canada'} changes US to USA and CA to Canada. The labels we would have shown must match the keys exactly, after adding any tickprefix or ticksuffix. For negative numbers the minus sign symbol used (U+2212) is wider than the regular ascii dash. That means you need to use −1 instead of -1. labelalias can be used with any axis type, and both keys (if needed) and values (if desired) can include html-like tags or MathJax.

  • minexponent
    Parent: data[type=indicator].gauge.axis
    Type: number greater than or equal to 0
    Default: 3

    Hide SI prefix for 10^n if |n| is below this number. This only has an effect when `tickformat` is "SI" or "B".

  • nticks
    Parent: data[type=indicator].gauge.axis
    Type: integer greater than or equal to 0
    Default: 0

    Specifies the maximum number of ticks for the particular axis. The actual number of ticks will be chosen automatically to be less than or equal to `nticks`. Has an effect only if `tickmode` is set to "auto".

  • range
    Parent: data[type=indicator].gauge.axis
    Type: Array

    Sets the range of this axis.

  • separatethousands
    Parent: data[type=indicator].gauge.axis
    Type: boolean

    If "true", even 4-digit integers are separated

  • showexponent
    Parent: data[type=indicator].gauge.axis
    Type: enumerated , one of ( "all" | "first" | "last" | "none" )
    Default: "all"

    If "all", all exponents are shown besides their significands. If "first", only the exponent of the first tick is shown. If "last", only the exponent of the last tick is shown. If "none", no exponents appear.

  • showticklabels
    Parent: data[type=indicator].gauge.axis
    Type: boolean
    Default: true

    Determines whether or not the tick labels are drawn.

  • showtickprefix
    Parent: data[type=indicator].gauge.axis
    Type: enumerated , one of ( "all" | "first" | "last" | "none" )
    Default: "all"

    If "all", all tick labels are displayed with a prefix. If "first", only the first tick is displayed with a prefix. If "last", only the last tick is displayed with a suffix. If "none", tick prefixes are hidden.

  • showticksuffix
    Parent: data[type=indicator].gauge.axis
    Type: enumerated , one of ( "all" | "first" | "last" | "none" )
    Default: "all"

    Same as `showtickprefix` but for tick suffixes.

  • tick0
    Parent: data[type=indicator].gauge.axis
    Type: number or categorical coordinate string

    Sets the placement of the first tick on this axis. Use with `dtick`. If the axis `type` is "log", then you must take the log of your starting tick (e.g. to set the starting tick to 100, set the `tick0` to 2) except when `dtick`="L<f>" (see `dtick` for more info). If the axis `type` is "date", it should be a date string, like date data. If the axis `type` is "category", it should be a number, using the scale where each category is assigned a serial number from zero in the order it appears.

  • tickangle
    Parent: data[type=indicator].gauge.axis
    Type: angle
    Default: "auto"

    Sets the angle of the tick labels with respect to the horizontal. For example, a `tickangle` of -90 draws the tick labels vertically.

  • tickcolor
    Parent: data[type=indicator].gauge.axis
    Type: color
    Default: "#444"

    Sets the tick color.

  • tickfont
    Parent: data[type=indicator].gauge.axis
    Type: Dict containing one or more of the keys listed below.

    Sets the color bar's tick label font

    • color
      Parent: data[type=indicator].gauge.axis.tickfont
      Type: color
    • family
      Parent: data[type=indicator].gauge.axis.tickfont
      Type: string

      HTML font family - the typeface that will be applied by the web browser. The web browser can only apply a font if it is available on the system where it runs. Provide multiple font families, separated by commas, to indicate the order in which to apply fonts if they aren't available.

    • lineposition
      Parent: data[type=indicator].gauge.axis.tickfont
      Type: flaglist string. Any combination of "under", "over", "through" joined with a "+" OR "none".
      Examples: "under", "over", "under+over", "under+over+through", "none"
      Default: "none"

      Sets the kind of decoration line(s) with text, such as an "under", "over" or "through" as well as combinations e.g. "under+over", etc.

    • shadow
      Parent: data[type=indicator].gauge.axis.tickfont
      Type: string
      Default: "none"

      Sets the shape and color of the shadow behind text. "auto" places minimal shadow and applies contrast text font color. See https://developer.mozilla.org/en-US/docs/Web/CSS/text-shadow for additional options.

    • size
      Parent: data[type=indicator].gauge.axis.tickfont
      Type: number greater than or equal to 1
    • style
      Parent: data[type=indicator].gauge.axis.tickfont
      Type: enumerated , one of ( "normal" | "italic" )
      Default: "normal"

      Sets whether a font should be styled with a normal or italic face from its family.

    • textcase
      Parent: data[type=indicator].gauge.axis.tickfont
      Type: enumerated , one of ( "normal" | "word caps" | "upper" | "lower" )
      Default: "normal"

      Sets capitalization of text. It can be used to make text appear in all-uppercase or all-lowercase, or with each word capitalized.

    • variant
      Parent: data[type=indicator].gauge.axis.tickfont
      Type: enumerated , one of ( "normal" | "small-caps" | "all-small-caps" | "all-petite-caps" | "petite-caps" | "unicase" )
      Default: "normal"

      Sets the variant of the font.

    • weight
      Parent: data[type=indicator].gauge.axis.tickfont
      Type: integer between or equal to 1 and 1000
      Default: normal

      Sets the weight (or boldness) of the font.

  • tickformat
    Parent: data[type=indicator].gauge.axis
    Type: string
    Default: ""

    Sets the tick label formatting rule using d3 formatting mini-languages which are very similar to those in Python. For numbers, see: https://github.com/d3/d3-format/tree/v1.4.5#d3-format. And for dates see: https://github.com/d3/d3-time-format/tree/v2.2.3#locale_format. We add two items to d3's date formatter: "%h" for half of the year as a decimal number as well as "%{n}f" for fractional seconds with n digits. For example, "2016-10-13 09:15:23.456" with tickformat "%H~%M~%S.%2f" would display "09~15~23.46"

  • tickformatstops
    Parent: data[type=indicator].gauge.axis
    Type: Array of Dict where each Dict has one or more of the keys listed below.
    • dtickrange
      Parent: data[type=indicator].gauge.axis.tickformatstops[]
      Type: Array

      range ["min", "max"], where "min", "max" - dtick values which describe some zoom level, it is possible to omit "min" or "max" value by passing "null"

    • enabled
      Parent: data[type=indicator].gauge.axis.tickformatstops[]
      Type: boolean
      Default: true

      Determines whether or not this stop is used. If `false`, this stop is ignored even within its `dtickrange`.

    • name
      Parent: data[type=indicator].gauge.axis.tickformatstops[]
      Type: string

      When used in a template, named items are created in the output figure in addition to any items the figure already has in this array. You can modify these items in the output figure by making your own item with `templateitemname` matching this `name` alongside your modifications (including `visible: false` or `enabled: false` to hide it). Has no effect outside of a template.

    • templateitemname
      Parent: data[type=indicator].gauge.axis.tickformatstops[]
      Type: string

      Used to refer to a named item in this array in the template. Named items from the template will be created even without a matching item in the input figure, but you can modify one by making an item with `templateitemname` matching its `name`, alongside your modifications (including `visible: false` or `enabled: false` to hide it). If there is no template or no matching item, this item will be hidden unless you explicitly show it with `visible: true`.

    • value
      Parent: data[type=indicator].gauge.axis.tickformatstops[]
      Type: string
      Default: ""

      string - dtickformat for described zoom level, the same as "tickformat"

  • ticklabelstep
    Parent: data[type=indicator].gauge.axis
    Type: integer greater than or equal to 1
    Default: 1

    Sets the spacing between tick labels as compared to the spacing between ticks. A value of 1 (default) means each tick gets a label. A value of 2 means shows every 2nd label. A larger value n means only every nth tick is labeled. `tick0` determines which labels are shown. Not implemented for axes with `type` "log" or "multicategory", or when `tickmode` is "array".

  • ticklen
    Parent: data[type=indicator].gauge.axis
    Type: number greater than or equal to 0
    Default: 5

    Sets the tick length (in px).

  • tickmode
    Parent: data[type=indicator].gauge.axis
    Type: enumerated , one of ( "auto" | "linear" | "array" )

    Sets the tick mode for this axis. If "auto", the number of ticks is set via `nticks`. If "linear", the placement of the ticks is determined by a starting position `tick0` and a tick step `dtick` ("linear" is the default value if `tick0` and `dtick` are provided). If "array", the placement of the ticks is set via `tickvals` and the tick text is `ticktext`. ("array" is the default value if `tickvals` is provided).

  • tickprefix
    Parent: data[type=indicator].gauge.axis
    Type: string
    Default: ""

    Sets a tick label prefix.

  • ticks
    Parent: data[type=indicator].gauge.axis
    Type: enumerated , one of ( "outside" | "inside" | "" )
    Default: "outside"

    Determines whether ticks are drawn or not. If "", this axis' ticks are not drawn. If "outside" ("inside"), this axis' are drawn outside (inside) the axis lines.

  • ticksuffix
    Parent: data[type=indicator].gauge.axis
    Type: string
    Default: ""

    Sets a tick label suffix.

  • ticktext
    Parent: data[type=indicator].gauge.axis
    Type: data array, Vector

    Sets the text displayed at the ticks position via `tickvals`. Only has an effect if `tickmode` is set to "array". Used with `tickvals`.

  • tickvals
    Parent: data[type=indicator].gauge.axis
    Type: data array, Vector

    Sets the values at which ticks on this axis appear. Only has an effect if `tickmode` is set to "array". Used with `ticktext`.

  • tickwidth
    Parent: data[type=indicator].gauge.axis
    Type: number greater than or equal to 0
    Default: 1

    Sets the tick width (in px).

  • visible
    Parent: data[type=indicator].gauge.axis
    Type: boolean
    Default: true

    A single toggle to hide the axis while preserving interaction like dragging. Default is true when a cheater plot is present on the axis, otherwise false

• bar
  Parent: data[type=indicator].gauge
  Type: Dict containing one or more of the keys listed below.

  Set the appearance of the gauge's value

  • color
    Parent: data[type=indicator].gauge.bar
    Type: color
    Default: "green"

    Sets the background color of the arc.

  • line
    Parent: data[type=indicator].gauge.bar
    Type: Dict containing one or more of the keys listed below.
    • color
      Parent: data[type=indicator].gauge.bar.line
      Type: color
      Default: "#444"

      Sets the color of the line enclosing each sector.

    • width
      Parent: data[type=indicator].gauge.bar.line
      Type: number greater than or equal to 0
      Default: 0

      Sets the width (in px) of the line enclosing each sector.

  • thickness
    Parent: data[type=indicator].gauge.bar
    Type: number between or equal to 0 and 1
    Default: 1

    Sets the thickness of the bar as a fraction of the total thickness of the gauge.

• bgcolor
  Parent: data[type=indicator].gauge
  Type: color

  Sets the gauge background color.

• bordercolor
  Parent: data[type=indicator].gauge
  Type: color
  Default: "#444"

  Sets the color of the border enclosing the gauge.

• borderwidth
  Parent: data[type=indicator].gauge
  Type: number greater than or equal to 0
  Default: 1

  Sets the width (in px) of the border enclosing the gauge.

• shape
  Parent: data[type=indicator].gauge
  Type: enumerated , one of ( "angular" | "bullet" )
  Default: "angular"

  Set the shape of the gauge

• steps
  Parent: data[type=indicator].gauge
  Type: Array of Dict where each Dict has one or more of the keys listed below.
  • color
    Parent: data[type=indicator].gauge.steps[]
    Type: color

    Sets the background color of the arc.

  • line
    Parent: data[type=indicator].gauge.steps[]
    Type: Dict containing one or more of the keys listed below.
    • color
      Parent: data[type=indicator].gauge.steps[].line
      Type: color
      Default: "#444"

      Sets the color of the line enclosing each sector.

    • width
      Parent: data[type=indicator].gauge.steps[].line
      Type: number greater than or equal to 0
      Default: 0

      Sets the width (in px) of the line enclosing each sector.

  • name
    Parent: data[type=indicator].gauge.steps[]
    Type: string

    When used in a template, named items are created in the output figure in addition to any items the figure already has in this array. You can modify these items in the output figure by making your own item with `templateitemname` matching this `name` alongside your modifications (including `visible: false` or `enabled: false` to hide it). Has no effect outside of a template.

  • range
    Parent: data[type=indicator].gauge.steps[]
    Type: Array

    Sets the range of this axis.

  • templateitemname
    Parent: data[type=indicator].gauge.steps[]
    Type: string

    Used to refer to a named item in this array in the template. Named items from the template will be created even without a matching item in the input figure, but you can modify one by making an item with `templateitemname` matching its `name`, alongside your modifications (including `visible: false` or `enabled: false` to hide it). If there is no template or no matching item, this item will be hidden unless you explicitly show it with `visible: true`.

  • thickness
    Parent: data[type=indicator].gauge.steps[]
    Type: number between or equal to 0 and 1
    Default: 1

    Sets the thickness of the bar as a fraction of the total thickness of the gauge.

• threshold
  Parent: data[type=indicator].gauge
  Type: Dict containing one or more of the keys listed below.
  • line
    Parent: data[type=indicator].gauge.threshold
    Type: Dict containing one or more of the keys listed below.
    • color
      Parent: data[type=indicator].gauge.threshold.line
      Type: color
      Default: "#444"

      Sets the color of the threshold line.

    • width
      Parent: data[type=indicator].gauge.threshold.line
      Type: number greater than or equal to 0
      Default: 1

      Sets the width (in px) of the threshold line.

  • thickness
    Parent: data[type=indicator].gauge.threshold
    Type: number between or equal to 0 and 1
    Default: 0.85

    Sets the thickness of the threshold line as a fraction of the thickness of the gauge.

  • value
    Parent: data[type=indicator].gauge.threshold
    Type: number

    Sets a treshold value drawn as a line.

Controls persistence of some user-driven changes to the trace: `constraintrange` in `parcoords` traces, as well as some `editable: true` modifications such as `name` and `colorbar.title`. Defaults to `layout.uirevision`. Note that other user-driven trace attribute changes are controlled by `layout` attributes: `trace.visible` is controlled by `layout.legend.uirevision`, `selectedpoints` is controlled by `layout.selectionrevision`, and `colorbar.(x|y)` (accessible with `config: {editable: true}`) is controlled by `layout.editrevision`. Trace changes are tracked by `uid`, which only falls back on trace index if no `uid` is provided. So if your app can add/remove traces before the end of the `data` array, such that the same trace has a different index, you can still preserve user-driven changes if you give each trace a `uid` that stays with it as it moves.